TES Issues.

[alpha20]

Ok, here's the deal, folks:

I go to shoot my gun and what happens is the gun totally uncocks after a shot or two and then ceases to recock for by itself (meaning that I have to manually recock it). I have been wondering a few things.

1. Is this because my regulator pressure is too low/high?
2. Is my spring too heavy?
3. Is there anything else that could be the trouble?

I would love to hear some answers soon, because I have to have this fixed by Sat. for a big game... tips and troubleshooting would be muchos appreciated! :blah:

[skylex]

hey i have a tes and mine is awesome maybe your air tank is low and try to mess with your reg to get the presher right or try replacing the o rings oil is tighten up everything ok tell me if anything works

[MaryJane420]

Originally posted by skylex
hey i have a tes and mine is awesome maybe your air tank is low and try to mess with your reg to get the presher right or try replacing the o rings oil is tighten up everything ok tell me if anything works

Well, the information he is trying to stress to you is correct, but his grammer is horrible, as well as spelling, so I will clean it up for you.

First thing you should do is be sure your tank is not low on air, it is a noob concept, but it happens sometimes.
If your good on air, then check your regulator pressure.
If its all good there, then take apart the gun and replace the striker and bolt o rings.
If that still does not work then try replacing the valve o ring.
And if that isnt the trouble then you could possibly have a leak or something malfunctioning horribly.

[DarkeWolf]

also just make sure that the bolt, the area where the bolt travels, and the area where the striker travels are completely clean, and doesnt have any bits of broken shells or dirt in there. and lube the o-rings on them, while you have them out.