T1 Rocket Valve

[S&S33]

anyone know where to buy a T1 Rocket Valve? I've looked everywhere and can't find one.

[wulf1010]

T1s use spyder valves

http://www.maddmanproducts.com/rocketvalve.html

go there right side of the page about 3/4s of the way down is the ordering button.

[TESballer]

doesn't the T1 use a different valve pin than spyders/tes's, one that doesn't let air to the ram right?

So a maddman wouldn't work because it can only use the valve pin that comes with it right?

If that's the case the New designz should work, but keep the stock valve pin in

[wulf1010]

Originally posted by TESballer
doesn't the T1 use a different valve pin than spyders/tes's, one that doesn't let air to the ram right?

So a maddman wouldn't work because it can only use the valve pin that comes with it right?



ahh crap your right, id totaly forgoten about that.
the rocket valve wont work. SORRY

[schoolsukz08]

Originally posted by TESballer
doesn't the T1 use a different valve pin than spyders/tes's, one that doesn't let air to the ram right?

So a maddman wouldn't work because it can only use the valve pin that comes with it right?

If that's the case the New designz should work, but keep the stock valve pin in

Right. On blowbacks they are semi circle, on air ram guns they are full circle, not letting air into the ram's chamber.

[wulf1010]

could you get a valve stem and cup seal from a pneumatic gun like the em1/tribal/bushy rocket valve, and stick it on a spyde rocket valve? Think that might work?

[sspaintball9590]

well...their is actually a rocket valve made for the T1. I just don't know where to buy it. I'm looking for a new valve for my O3E and it uses T1 valves. So does anyone know where to buy any aftermarket valve for the T1? BTW, I was on my bro's account when I posted that before.

[DarkeWolf]

I think that this might be what you are looking for
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=16048&item=7160556102&rd=1&ssPageName=WDVW

he's selling of a the One for parts, and hopefully, those are what you need.

[half-step]

just order a spyder and put a note in the paypal transaction that its a one valve and email us after.

This is a directly quoted email from Mike at maddman products and that is how I ordered mine. Unfortunately, they have been running behind, but I should be receiving mine this week.

A valve pin from another style marker will not work in the rocket valve. The valve pin is not what is different between the spyder valve and the the T1 valve from maddman. It is the body of the valve. The blow back valve body has a slit in the striker side to allow blow back to recock the marker. You use the maddman spyder valve for the TES. The T1 valve does not have the slit and has an added o ring to the ram side to create a better seal between the valve body and ram. The spyder valve has only one o ring toward the cup seal side and the T1 valve will have two o rings.