Imp problems (evil parts) need help

[Mr X]

k my friend has a impulse with evil punch, resperator and valve. Something is worng with it. The gun workes great when shotting slow like one shot and then another the problem is not the reg cause I tried 2 other ones that work fine, my guess is the resperator, but dont know. I've probably spend 3+ hours trying to fix it. When I start to shoot fast the gun coughs and the bolt gets stuck in the foward position and just stops there. I'm out of Ideas and need help the evil tech was no help on the problem so mabey some one else had the same problem, oh ya the dwell is high. Its not a easy thing like that so get on your thinking cap and please help me. Thanks for your help. If you have the time to talk to me my AIM is rckornely.

[speedy2k4]

well to start off, my friend has the same parts, they are realy bad, and his gun isn't working either. the valve isn't bad, but id designed for higher pressures, around 300psi. the puch isn't bad either, but not good. the respirator is terrible, it is what isn't working about my friends gun. it broke, and even before that was horrible.

try getting a new lpr, or even a front cap and tapeworm. generally, i stay away from evil parts.

[ase]

Originally posted by speedy2k4
i stay away from evil parts.

:nod: :tup:

[ikey]

in general tehy are not very good for typical impulse setups. but when run at higher pressures tehy work fine. also, i have heard that when you add a new reg and take off teh PRV, and run the valve pressure at over 250 psi, you can make an impulse insanely inffecient with evil stuff because of the high pressure. im talking like over 2000 off a 68/4500. or atleast that what ive heard. i think TPD has done this. but in general i would get ND parts. tell your freind to set up the pressure at like 200-220 (no higher without doing mods).

[Mr X]

the parts are on teh gun and I know evil parts arnt the best but theres no choice, just want to know if there is a evil person who has there imp working good

[ikey]

well likei said, i think toothpastedog has used imps with evil parts, and they run better at higher pressures. set the pressure at 200-220 and adjust the respirator acordingly....im assuming you know how to do this, if not look in the stickies.

[Mr X]

thanks for the help, and I do know waht i'm doing cause I have a imp and my friend has a imp and my brother has one, thats why i came here for help