Arugh. TES Probs.

[alpha20]

Ok well I got a System X Xtreme Expansion Chamber for my gun today, since I run it w/ co2. I figured that it would be fine, so I had it installed, and he aired up my TES and it aired up, but he didnt fire it.

Well, I get home, air it up and get ready to blast some paint, but it only shoots once and doesn't recock. There are two allen key fittings which I turned either way (both of them) to no avail. What is the problem?

I have tried different springs, all types, tensions, everything! What could I have done?

[BoneDaddy68]

a/s your co2. if u use co2 youll have loads of problems in the long run. The only things i could think of would be tht either your pressure is too high/low, your macroline is hooked up wrong (if u use it.) Or your valve stem isnt letting enough air into the gun for recocking.

[wulf1010]

if you took your reg off your TES the gun would now be getting around 800psi strait from your co2 tank. The gun is designed to run at around 350-400 psi. having the pressure up this hi will overpresureize your valve, making it so that your gun wont cycle properly....and if you DO get it cycling by putting a heavier spring in, its unlikely that youll have safe velocitys. This happend when we put a turbo valve and exp chamber on a friends gun.
If you want to keep your expansion chamber you will need to get a horizontal reg. Id suggest scraping the exp chamber for a palmers reg, but thats up 2 you.

Or if you want to keep the exp chamber, you could get a palmers female stabalizer.

[Rangerman40]

Why'd you take off your reg in favor of an expansion chamber???? Waste of money........... yyyyyeaaah.

[Paintball=life]

Ya TES's ABSOLUTLY NEED A REGULATOR!!!!!!!!!! Or u screwed cause it won't shoot