Uhmmm, Any Broken TL plus's?

[chevy123]

Yeah, i just got my TL plus about two days ago. So oiled it took it out, fired a few, worked great. Oiled it again. Next day fired well. Then today, I hook up the c02, turn the c02 to on, and FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF, air leaking from everywhere, mainly from the sides of the trigger frame. I'm like... Ok.. so quicky turn off the c02, and i figured i put too much oil? So i just cocked the gun and fired without c02 connected to it a couple of times. Connected the c02 back, SAME CRAP, leaking. Then i almost gave up, but 5 minutes later I hooked the c02 back up and it works fine. And I just tried it now ( about 5 hours later ) and it still works fine. Anything I need to worry about?

[chevy123]

thx

[chevy123]

_ _ _ _
| | | |
| | | |
| | |_ _ _ _|
| | |
| | |
|_ _ _ _ | |

[MTU_Paintballer]

If you didn't have the gun cocked when you connected the air source then air will rush out of the barrel. It didn't sound like you thought thats where the air was coming from but its an idea.

[Intruder]

yep

[Hsuve]

Originally posted by MTU_Paintballer
If you didn't have the gun cocked when you connected the air source then air will rush out of the barrel. It didn't sound like you thought thats where the air was coming from but its an idea.

Not necessarily, if you have a stiff valve spring, then you don't have to worry about cocking the gun before you gas it up. However, it is a thing to try.

[TLplus84]

OR it sounds like your valve is really really FUBAR...check that out..if you scratch the valve even a little bit, you'll need to change it..

[chevy123]

no, its a stock TL plus, And i did have it cocked when releasing the air.

[chevy123]

Tlplus84's genitals are FUBAR. ( I promise this is the last useless post ;))