b2k problem

[LGP-Spyder]

ok, when i shoot my b2k w/ pds it fires but its as if theres no pressure behind the shots, i dont have a chrono but id estimate about 100fps, the hpr is at 300 and the lpr is at 90 any one know what the problem could be?

[Koval15]

umm make sure your on/off if you have one is screwed in all the way. Lube your reg. check for blowback. Lube your ram.

[lawnboi]

Your reg should not be set at 300, read the manual and set your reg between 200-250. That might help because bushys are designed to not shoot over a certain fps. You may be way over it. Just try that, then lube everything good and try it again.