PDA

View Full Version : Things to do to a new gun


aspntbll777
07-14-2005, 07:10 PM
ok... i just got my gun(literally... like it just came in the door) and i am wondering wut should i do to it before i go to play?

erickillebrew
07-14-2005, 07:15 PM
put about 2 drops of oil(paintballgun oil) thru the Air source adapter(where the tank goes) then lub up the bolt and striker lightly and fire your gun a few times w/o paint so the oil goes all inside of it

I assumed you have a blowback marker since it is your first gun

if i missed somthing somone please add to it

DiabloPaint3
07-15-2005, 04:18 AM
do you have to take the gun apart to oil the bolt

four_wheelerer
07-15-2005, 05:26 AM
you only have to field strip it to oill the bolt

Bellicose
07-15-2005, 09:10 AM
What type of marker? Check to see if the orings on your tank are good, and oiled. Make sure to wear a mask.

four_wheelerer
07-15-2005, 11:58 AM
Originally posted by Bellicose
What type of marker? Check to see if the orings on your tank are good, and oiled. Make sure to wear a mask.

are your supposed to oil the orings on your tank?

slaminator3323
07-15-2005, 12:06 PM
Yes.

four_wheelerer
07-15-2005, 12:23 PM
if never done that and it would probably be a good i dea cause sometimes it leaks around my oring and i mess with it and it stops

aspntbll777
07-16-2005, 12:21 PM
Originally posted by Bellicose
What type of marker?

i have a spyder xtra

.:{}:.
07-16-2005, 03:08 PM
^^listen to what everyone said^^

..SilentAngel..
07-16-2005, 06:32 PM
You MIGHT have to adjust the velocity, though I'm not sure.