PDA

View Full Version : Air Help


Sfgadv
01-20-2002, 05:38 PM
Ok, i just got a shocker today, and i have a remote, but everytime i put my tank in, and turn the remote on nothing happens, i new with this gun so any advise will deeply help!

baddy1121
01-20-2002, 06:13 PM
is the battery on

Sfgadv
01-20-2002, 06:15 PM
yea

baddy1121
01-20-2002, 06:16 PM
is there an on/off on your max flo

Sfgadv
01-20-2002, 06:23 PM
i have no idea, what would it look like

Sfgadv
01-21-2002, 09:29 AM
ok, theres no on/off valve, only on the remote, but now when i turn the tank on, it comes out the back of the reg.

baddy1121
01-21-2002, 10:55 AM
ok

do you have a tank o-ring handy

baddy1121
01-21-2002, 10:58 AM
stick a o-ring in your ca adaptor

or

you might need to turn down your reg. if it is over 200, turn it down

Sfgadv
01-21-2002, 04:23 PM
ok, it went in but the velocity wouldnt go up, now it doesnt work at all again:pissed:

kjm3388
01-22-2002, 01:43 PM
Ok i need help too. My gun just leaks air like crazy when i screw in the tank what do i do?!?!

baddy1121
01-22-2002, 03:23 PM
where does it leak

Sfgadv
01-22-2002, 04:26 PM
right out the back of the reg.

baddy1121
01-22-2002, 04:32 PM
did you try turning down the reg?

you know alot of people have this gun
where is there input

Sfgadv
01-22-2002, 04:39 PM
having the reg almost backed off is all the way down right?

baddy1121
01-22-2002, 04:40 PM
as long as it is under 200

doesn't yours have a gauge

Sfgadv
01-22-2002, 04:50 PM
yea, but the gas isnt going in, its coming back out the back of the reg

baddy1121
01-22-2002, 04:53 PM
do you know how to take it apart

if not you might need to take it to someone who can fix it

Sfgadv
01-22-2002, 05:00 PM
ok, I took it apart and used the pic on the site of the reg. and it looks like im missing a FP/Poppet Seat Seal, could that be causing my problem?

baddy1121
01-22-2002, 05:01 PM
that would be the problem probably

I haven't had this very long either so I dont know to much about problems yet

kjm3388
01-26-2002, 06:50 AM
hey this is off the subject of paintball but sfgadv u were on coaster froum before righT?

Sfgadv
01-26-2002, 07:59 AM
haha, yea im the same kid

RcPhatty
01-26-2002, 08:16 AM
Ok for the guy whose reg is leaking air out the back of the reg, Do you have an on/off on the tank? Is your reg adjusted up too high, like over 200? If you're leaking you should turn down your reg down to around 100 or so and then screw in your tank and then slowly turn up the reg. The reason that it's leaking is because the pressure is going into the reg way too suddenly for the reg to handle it so it's blasting out the pressure. I had this problem before. I hope what I said helped

Sfgadv
01-26-2002, 08:19 AM
ok, i finally took my problem to my local shop and they said it was a bad reg. that smart parts put on, so sorry for the trouble and thanks to everyone that helped me out