Shocker Help! Ait Leaking!

[kjm3388]

Ok I just got a 99' shocker turbo. When i screw in my nitrogen tank it just spirs out air like crazy!!! HELP!!!!HOw do u change the reg on the 99' versions!!!! ANY HELP WOULD HELP!!

THANK YOU

[shockerdave84]

Where exactly is it leaking from???

[kjm3388]

i got it fixed it was leaking outta the reg asa thingy i have to put an o ring in it though

[shockerdave84]

Try a tighter tank without an oring and see if that work you may just have a loose tank thats all.

[Jesse_Hoeft]

I would say most high dollar guns you need an oring so that it doesn't leek Mine does mines a 2000 Shocker and a lot of my friends have to use orings

[kjm3388]

im using a crossfire 68/4500 tank...ill prolly get a 20oz soon thoough

[RcPhatty]

If I was you. I would get my reg mounted vertically and then get like a Benchmark On/off drop so that you can keep the nitro. I used co2 and I hated when my gun would freeze and that I had to clean my filter in my reg every couple of monthes. It got crazy. So keep the nitro.

[kjm3388]

y a vert mount reg and a on/off drop forward!?!

[RcPhatty]

In order to be able to gas up your gun without wasting air or having to adjust your reg everytime you can buy an on/off frame that will allow you to slowly put the pressure into your reg. But because you can't mount the on/off on the reg itself you have to get it mounted vertically, unless of course you want to buy a Max-Flow nitro system. It's just a cheaper alternative to that. Unless you want to get c02, but I personally don't like it.