small air leak (valve cap)

[kingman 1000]

theres a small air leak comming out of the front of the valve cap on my imp, is this someting to worry about?



Thanx :D

[Dark Master]

Is it coming out of the plug? If so, removie it, and put some teflon tape/loctite on it.

[kingman 1000]

there is already some loctite on it (the red stuff) and still its leaking :confused:

[Dark Master]

Try putting teflon tape/loctite on it again.

Or is it coming from the pressure relief valve?

[Team Chokepoint]

He said a small leak, so its probably not the PRV (brass thing on your vertical ASA).

Check the oring located above the threads that screw into the body on the cap.

[speedy2k4]

or is it just coming from the valve cap itself? take it off and replace the o-ring. what is your input pressure?

[Team Chokepoint]

Oh, FRONT OF the valve cap, I missed that part :eyes:

EDIT: btw, I think your sig is too long, its supposed to be 12 lines max.

[dingleberries]

Originally posted by Team Chokepoint

Check the oring located above the threads that screw into the body on the cap.

:agree:

[kingman 1000]

my input pressure is 180 psi, and it still leaks, i guess sp didnt put enough loctite on the screw :(