Max Feed rate possible...???

[^Psycho^Skillz^]

I was just reading up on some warpig tech articles and they said that the fastest balls will feed by the pull of gravity alone is 13bps.

I was just wonderin how HALO's can feed faster...I haven't noticed any accelerated forms of feeding (like a warp feed). Just wondering how it can feed faster than 13bps, does it have some kind of acceleration on the balls? or...?

[HondaRacer2120]

i think it has a wheel in it like warps

[VeNoM]

ya it pushes and sorts the balls down the feed tube, so it feeds faster than a gravity (or so its supposed to) i just watched a video on pig tv and the guy said he got the loader to feed 35-40 bps . . . stock he said it will do 16 bps.

[foxracer2269]

How fast would a warp feed go with a halo on top.25bps???

[King0liver]

The max speed of the warp feed is not affected by the hopper. The hopper appects how long the warp can keep up its high feed rate. EX: A warp with a 9v revy will feed at like 20bps (if set right) but once the "wheel" of 20balls or so in the warp is depleted it will only feed as fast as the hopper on it, so in this case, if you gave it no time to recharge it would feed at 20bps for a few sec then like 8 untill you let the wheel fill itself up again. So a warp with a revy will feed the same MAX rate as a warp with a Halo, but its fast loading will be a shorter period or time before needing a "recharge"

[DEMOLITION]

THE FASTEST THE WARP FEED CAN FEED IS ABOUT 70 BPS.. THIS IS ONLY CAPABLE WHEN THE TRIGGER IS BEING PULLED BY A COMPUTER AND THE TUBE IS REALLY REALLY LONG..

[King0liver]

"THE FASTEST THE WARP FEED CAN FEED IS ABOUT 70 BPS" NO! where the hell did you pull that out of!? its in the 20's! and the length of the tube DOESNT effect the MAX feed speed!

[DEMOLITION]

YOU OBVIOUSLY DONT KNOW WHAT U ARE TALKING ABOUT BUT IF U CHECK THE AIRGUN WEBSITE...I WAS WRONG IT ISNT 70BPS ITS ACTUALLY HIGHER..75 2 BE EXACT!!!

THIS IS FROM THE AIRGUN WEBSITE!!!!
Q-What speed will it feed?
A-It depends on battery voltage. With 6 volts it feeds a gun at 12-13 balls a second, at 12 volts it feeds over 20 balls a second. In testing we have spun it up to 75 balls a second with no problems. Most players will do fine with the 6-volt system.

[elTwitcho]

If you don't stop posting entirely in capital letters I am going to castrate you

[DEMOLITION]

haha aight then ill stop...castrate sounds kinda nasty

[snipinhick]

yes, castrate is the departure of the genitalial by force ie... whole unit choped:D

[DEMOLITION]

ahhh i see!! but enough with the medical procedures!!

[elTwitcho]

Originally posted by DEMOLITION
ahhh i see!! but enough with the medical procedures!!

Hehehe, but it DID get the point across, don't you agree :)

[SGT BiGGiE]

the warp feed feeds as fast as the motor/voltage allows,kinda thinkign makeing a back pack system in it for liek a remote hopper would be sweet almost

[TheSickness]

i was playing a game one time and i swore the guy must of had a reamote hopper. he had a angel with this beasty tube running off the feed port to his harness. then he had this case thing on his waste. it was crazy. its was super low profile.

[SilverFox]

I built a remote hopper for a friend. He now has a modified emag micro with a 500 cuin 4500 psi tank and a 2500 round agitated hopper with a suped up warpfeed. Hcan empty the hopper in just over 2.5 min.

[Impy4335]

there is a back pack hopper. I think its called the mega something. Read about it on Warpig.