Impulse Problems, Need Help

[-RuShPB227-]

OK here are the problems I have

1. My reg is freezing and its venting air sometimes. What causes this? Is it that there is liquid C02 getting into my gun? I have an anti siphon tube but i dont think it was set up for my impulse

ok 2. Sometimes ill shoot, and it will kinda sputter before it recocks. A guy at the field told me is because of the dwell settings.

Im getting nitro, so that should solve problem 1. Tell me what you think I should do I need help seriously!

[PBSouLjAh]

to me it sounds like the solenoid and dwell. maybe the solenoid is dirty and its clogged so it sputters. take it to ur shop to get it cleaned out. try cleaning out the whole gun too. and get a new battery. make it feel fresh and fully energized.

[bob dole]

as far as problem one goes, i would say that your reg is probably getting some liquid in there, because unless your luckier than i am, your anti-siphon tube will not be set up just right for your imp (mine wasn't, im getting the anti-siphon tube lined up as im typing this). but hey, your getting nitro, so no real need to worry about that.

as for your second problem, i would guess that it is your dwell-if you dont have it set right, it could be causing those problems, but i would also agree with PBSouLjAh-try cleaning the solenoid and see if that helps. I gotta say, though, im not positive, so try and get some more opinions.

hope i could help!

[-RuShPB227-]

ok im gunna work on the dwell. Ive never really worked on my solenoid either. What should I look for when I get to it? Like where do I look for clogs?

[-RuShPB227-]

tonight before I go to bed ill clean it all. I am real scared to mess with the solenoid though. I dont want to mess anything up.

[Impy4335]

careful abut stripping!!!!(the solenoid screws and screw hole threads)
________
AVANDIA HELP (http://www.classactionsettlements.org/lawsuit/avandia/)

[-RuShPB227-]

i cleaned the whole gun, solenoid and everything. there was no dirt or clogs in there so i think that the whole problem is my dwell.

[ds613]

It's your dwell. I had the same problem. Set your pressure to 180 psi, and then use the dwell to adjust the velocity.

[-RuShPB227-]

i did that yesturday at the field but stupid me forgot to lock down the pressure . :|