Whats wrong with this b2k

[pbrascal37]

OKay my friend just got a b2k with PDS and after he was done testing it out (with co2) he unscrewed the tank. He let the gun alone for a little while after he came back to it (about 10-15 minutes) he aired it up again. The guage went all the way up and he heard a fast leak so he unscrewed the tank as fast as he could and let it be for a minute, he aired it up again and now the guage is reading 100 and won't cock, even when the reg was turned back up to 220 it still won't cock or fire.

any idea whats wrong? I am thinking he blew the noid or over pressurized the lpr

[victrod3]

I would just carefully strip the gun. Checking and lightly lubing all seals and moving parts with white lithium. You will need to learn how to do this anyways. And once you have it all back together it will probably work just fine. I dont think the gun was harmed. Plus make sure you are using an alkaline battery. That wont cause the leak but it will affect how it fires.
P.S the leak may have been from the the screws holding noid on being a bit loose.

[pr0xy_dA3m0n 1]

try using air instead of co2 on a ICD product, and a yeah ICD.

[ShootPaint]

Back out the regs adjustment screw three turns. Gas the marker up and then reset both regs.

It sounds like your regs have the pistons locked up. This will keep the marker from gassing up and getting air to the solenoid to recock the marker. By doing the above you usually free the pistons up in the regs when you gas the marker up.

[pbrascal37]

okaty that sounds more plausable I will tell him tommorow at school (it is kinda late to call now) and let you know if it works