PDA

View Full Version : shouyld i get anoter gun, i have a rebel


wildpaintperson
01-27-2002, 03:21 PM
i just bought my rebel 2-3 weeks ago and it stinks compared to my friends guns and i was wondering if i should get another like a tippman 98 custom or sumthin.. i have no money either

jaredu
01-27-2002, 03:36 PM
Well, if you have no money, then you can't get another gun....What's wrong with your rebel? I love mine...It's awesome and it's about equal to a tippmann when it's taken care of (like mine).......BUT...if you wish, I would get a tippmann..Those are nice if you like to be un-unique.......

wildpaintperson
01-27-2002, 03:38 PM
dude how do u know if your rebel is taken care of?

jaredu
01-27-2002, 03:41 PM
Because I oil it, clean it after each time I shoot it...Keep it nice looking.

wildpaintperson
01-27-2002, 03:42 PM
i have never oiled mine, but i use a squeegee thing.

jaredu
01-27-2002, 03:45 PM
That could be your prob...Try oiling it: Put a few drops of oil into the place where you screw in your tank...Screw in your tank and remove the barrel and don't load paint...Then shoot about 20 shots and it's oiled....

The squeegie is just used to clean your barrel..That will help you paint shoot straight but will not affect the way your gun performs other than the paint shooting

wildpaintperson
01-27-2002, 03:46 PM
im afraid to do thAT

Paintball360
01-27-2002, 04:22 PM
i would oil it where you put oil where you put the tank it so it can lube your interals i would also take the bolt, ect and oil them to.

wildpaintperson
01-27-2002, 04:25 PM
hell no, im a beginner

jaredu
01-27-2002, 04:39 PM
Don't worry...It is ok to do that...That is what I do and mine is still working fine...Once you do it, your rebel should be better.

Paintball360
01-27-2002, 04:40 PM
Well if you need how every thing gose together here is the link for the rebel manual but you will need adobe acrobat

http://www.32degrees.com/html/techmain.asp

punkerx1
01-27-2002, 07:06 PM
hey hey hey! its actualy quite simple to take your rebel bolt etc. out. all u do it push that little pin out of the back that goes in sideways.. thne u pull out the top cocking knob, thne u take the plugs out of the back. thne u take ur bolt etc. out.. then add a few drops of oil to each part and ur redy to go! just make sure to put evrything in rght. good luck!;)