impulse shooting whacky

[Impulsiveretard]

impulse set up
impulse maxflo
shocktech delrin bolt
new hammer?

my pressure is set right, i dont know if it is the dwell but the gun but it wont shoot straight. i changed the barrels and stuff but what does the dwell do with the gun?

[NinjaSquirel]

The dwell is the amount of time the valve is left open. The dwell is measured in milliseconds I believe and each dwell increment is .25 ms. Are you using crappy paint? Have you shoot this paint before with a different outcome? What about your detents just out of curiousity?

[Impulsiveretard]

yeah the paint was kinda crappy that day at the field, but it was doing that before for alittle. i believe the detents are fine, theyre both there, ill replace them just to be sure. also the little piece where the eye goes sorta. it broke off, i dont know if that is causing the pressure in the breech to be thrown off or something.

[smartguy41]

Check your velocity! Paint will Corkscrew at arond 310 fps...or at least mine did!

[NinjaSquirel]

Yea My paint shoots crappy at over 315FPS, If you dont have a chrono try shooting your gun and either lowering your vert reg or lowering the dwell and tell us how that goes.

[impulsemaster19]

had that problem and bought it to the place i got it and they straited it out.

*had to do with the lpr i had just bought*

[impulsemaster19]

never mine cancal wut i said!!!

its ur bolt, shocktech bolts result in a low velocity

(had one and now just shot the stock bolt)