PDA

View Full Version : Need help with leaking - PLEASE


Integ182
01-31-2002, 05:18 PM
I took my gun all the way apart becuase it was leaking out of the lpr when i turned it up. Now its leaking somewhere and i dont know where but when i cover the little hole in front of where the slot that the bolt pin goes (down to the ram) it blocks the air, but i can still hear it leaking pretty good. Anyone know whats going on? Please help, need it to work by this saturday (2nd)

Richy_C
01-31-2002, 06:04 PM
Replace your RAM orings.

Integ182
01-31-2002, 07:08 PM
where do i get new ones? or are they jsut reg. o-rings that you put on tanks

Richy_C
02-02-2002, 07:49 AM
Didn't your bushy come with a couple? Check in your box, there should be some. If not, you can get them at couple online stores, but not many local places carry ICD parts.

Integ182
02-02-2002, 03:55 PM
nah, i baught it used. BTW, I fixed the leak 8- )

mike da bushman
02-05-2002, 07:23 AM
umm first try the battery see if that helps also take out your valve and inspect the cup seal and valve seal....mike

Ronn
02-06-2002, 04:23 AM
Let us know what you did to fix the leak.

Integ182
02-06-2002, 04:45 AM
i took the whole thing apart again (internals) and greased the valve o-rings.