Phantom_
12-23-2005, 02:56 PM
Screw Threads
Bushmaster
Barrel Threads:
ICD/Bushmaster threads: 7/8” x 20 tpi (4-lead thread)
Autococker threads: 15/16” x 20 tpi
LPR Threads:
7/8” x 20 tpi (LPR to body)
3/4” x 32 tpi (LPR adjusting knob)
Ram Housing Threads:
7/8” x 20 tpi (Housing Body)
5/8” x 18 tpi (Ram Cap)
Ram Shaft Threads:
10-32
Feedneck Threads:
13/16” x 32 tpi
Low Pressure Air Passage Plug Threads:
8-32 x 1/4"
Bolt Set Screw Threads:
5/16 -24 x 1/2"
Tray to Body Screws (4 ea.) :
6-32 x 1" (Socket Head Cap)
Grip Frame to Tray Screws (2 ea.):
8-32 x 3/8" (button head)
Grip Panel to Grip Frame Screws (4 ea.):
6-32 x 1/4" (button head) (stock and most aftermarket frames)
8-32 x 1/4" (button head) (Zenitram 45 frame)
Trigger Set Screws (3 ea.) :
8-32 x 1/4" (set Screw)
Valve Lock Screw (1 ea.):
3/8-24 x 1/4"
Manifold to Body Screw (4 ea.):
4-40 x 3/8" (Socket Head Cap)
Solenoid to Manifold Screw (2 ea.) (old style manifold only):
1.6 mm screws (really small)
Eye Cover Screw (2 ea.):
6-32 x 5/8” (button Head)
New Style Detents w/o PDS (O-ring) Screw (1 ea.):
6-32 x 1/4" (button Head)
Battery Door and On/off Switch Screw (On tray, 2 ea.):
3-48 x 3/16”
Micro-Switch Replacement Screw (2 ea.):
2-56 x 3/4"
Bottomline Screw (2 ea.):
10-32 (lengths vary)
BKO
Barrel Threads:
ICD/Bushmaster threads: 7/8” x 20 tpi (4-lead thread)
Autococker threads: 15/16” x 20 tpi
2K4 LPR Threads:
7/8” x 20 tpi (LPR to body)
3/4” x 32 tpi (LPR adjusting knob)
Ram Shaft Threads:
10-32
Feedneck Threads:
13/16” x 32 tpi
Ram screws (2 ea.):
10-32 x 1/2" (Button Head)
ASA Block screw (2 ea.):
10/32 x 3/4" (Socket Head Cap)
Bolt Set Screw Threads:
5/16 -24 x 1/2"
Tray to Body Screws (4 ea.):
6-32 x 7/8" (Socket Head Cap)
Grip Frame to Tray Screws (2 ea.):
8-32 x 3/8" (button head)
Grip Panel to Grip Frame Screws (4 ea.):
6-32 x 1/4" (button head) (stock and most aftermarket frames)
8-32 x 1/4" (button head) (Zenitram 45 frame)
Trigger Set Screws (3 ea.) :
8-32 x 1/4" (set Screw)
Valve Lock Screw (1 ea.):
3/8-24 x 1/4"
Eye Cover Screw (2 ea.):
6-32 x 5/8” (button head)
New Style Detents w/o PDS (O-ring) Screw (1 ea.):
6-32 x 1/4" (button Head)
On/off switch Screw (On tray, 2 ea.):
3-48 x 3/16”
Micro-Switch Replacement Screw (2 ea.):
2-56 x 3/4"
Bottomline Screw (2 ea.):
10-32 (lengths vary)
Freestyle
?????
O-ring Sizes (Dash No.)
Bushmaster:
LPR:
Lpr adjsuter: 015
Piston: 015
Body: 019 and 016
Valve: 016
Ram:
Housing: (3)015 and 010
Shaft: 011 and 006
Asa: 012
Manifold: (2)006 and 015
2K3 HPR:
Upper part: 015 and 019
Piston: 011
Lower part: 010
Detent: 010
BKO:
Detent: 010
Ram:
Shaft: 010
Housing: 015
Volumizer: 016
Valve: 016
Asa: 012 (2)
Asa/LPR:
Piston: 011
Lpr housing: 014
2K3 HPR:
Upper part: 015 and 019
Piston: 011
Lower part: 010
Freestyle:
?????
Miscellaneous Information:
Rubber washers used as 2K3+ o-ring detent replacements: 5/32 x 3/8 x 1/16
Bonebrake bolt front o-ring: 5/8 x 1/2 x 1/16 (Home Depot- #28 o-ring) (Dash No. 014)
Bushmaster
Barrel Threads:
ICD/Bushmaster threads: 7/8” x 20 tpi (4-lead thread)
Autococker threads: 15/16” x 20 tpi
LPR Threads:
7/8” x 20 tpi (LPR to body)
3/4” x 32 tpi (LPR adjusting knob)
Ram Housing Threads:
7/8” x 20 tpi (Housing Body)
5/8” x 18 tpi (Ram Cap)
Ram Shaft Threads:
10-32
Feedneck Threads:
13/16” x 32 tpi
Low Pressure Air Passage Plug Threads:
8-32 x 1/4"
Bolt Set Screw Threads:
5/16 -24 x 1/2"
Tray to Body Screws (4 ea.) :
6-32 x 1" (Socket Head Cap)
Grip Frame to Tray Screws (2 ea.):
8-32 x 3/8" (button head)
Grip Panel to Grip Frame Screws (4 ea.):
6-32 x 1/4" (button head) (stock and most aftermarket frames)
8-32 x 1/4" (button head) (Zenitram 45 frame)
Trigger Set Screws (3 ea.) :
8-32 x 1/4" (set Screw)
Valve Lock Screw (1 ea.):
3/8-24 x 1/4"
Manifold to Body Screw (4 ea.):
4-40 x 3/8" (Socket Head Cap)
Solenoid to Manifold Screw (2 ea.) (old style manifold only):
1.6 mm screws (really small)
Eye Cover Screw (2 ea.):
6-32 x 5/8” (button Head)
New Style Detents w/o PDS (O-ring) Screw (1 ea.):
6-32 x 1/4" (button Head)
Battery Door and On/off Switch Screw (On tray, 2 ea.):
3-48 x 3/16”
Micro-Switch Replacement Screw (2 ea.):
2-56 x 3/4"
Bottomline Screw (2 ea.):
10-32 (lengths vary)
BKO
Barrel Threads:
ICD/Bushmaster threads: 7/8” x 20 tpi (4-lead thread)
Autococker threads: 15/16” x 20 tpi
2K4 LPR Threads:
7/8” x 20 tpi (LPR to body)
3/4” x 32 tpi (LPR adjusting knob)
Ram Shaft Threads:
10-32
Feedneck Threads:
13/16” x 32 tpi
Ram screws (2 ea.):
10-32 x 1/2" (Button Head)
ASA Block screw (2 ea.):
10/32 x 3/4" (Socket Head Cap)
Bolt Set Screw Threads:
5/16 -24 x 1/2"
Tray to Body Screws (4 ea.):
6-32 x 7/8" (Socket Head Cap)
Grip Frame to Tray Screws (2 ea.):
8-32 x 3/8" (button head)
Grip Panel to Grip Frame Screws (4 ea.):
6-32 x 1/4" (button head) (stock and most aftermarket frames)
8-32 x 1/4" (button head) (Zenitram 45 frame)
Trigger Set Screws (3 ea.) :
8-32 x 1/4" (set Screw)
Valve Lock Screw (1 ea.):
3/8-24 x 1/4"
Eye Cover Screw (2 ea.):
6-32 x 5/8” (button head)
New Style Detents w/o PDS (O-ring) Screw (1 ea.):
6-32 x 1/4" (button Head)
On/off switch Screw (On tray, 2 ea.):
3-48 x 3/16”
Micro-Switch Replacement Screw (2 ea.):
2-56 x 3/4"
Bottomline Screw (2 ea.):
10-32 (lengths vary)
Freestyle
?????
O-ring Sizes (Dash No.)
Bushmaster:
LPR:
Lpr adjsuter: 015
Piston: 015
Body: 019 and 016
Valve: 016
Ram:
Housing: (3)015 and 010
Shaft: 011 and 006
Asa: 012
Manifold: (2)006 and 015
2K3 HPR:
Upper part: 015 and 019
Piston: 011
Lower part: 010
Detent: 010
BKO:
Detent: 010
Ram:
Shaft: 010
Housing: 015
Volumizer: 016
Valve: 016
Asa: 012 (2)
Asa/LPR:
Piston: 011
Lpr housing: 014
2K3 HPR:
Upper part: 015 and 019
Piston: 011
Lower part: 010
Freestyle:
?????
Miscellaneous Information:
Rubber washers used as 2K3+ o-ring detent replacements: 5/32 x 3/8 x 1/16
Bonebrake bolt front o-ring: 5/8 x 1/2 x 1/16 (Home Depot- #28 o-ring) (Dash No. 014)