Anti syphon in impulse

[austin-d-111]

hey guys i want to put anti syphon through my impulse. is that ok? cuz i cant get hpa fills here. only co2. so if anti syphon will work ill use that. cuz i have a war to go to. and jhow do u taake out a bolt cuz im totally confused about the top cocking piece and it wont come out. does it screw out? let me know asap so i can clean and lube my gun. Thanks alot
Austin

[paintballer279]

Using CO2 on most high end electros is voiding the warranty. That is why you should avoid Co2 at all costs. The top cocking bolt is supposed to screw out or pull out, but you sy it cant be pulled out. You may have to keep asking for antoher good reply.

[austin-d-111]

ok thanks alot. but i cant stay away from co and only usen the the imp. for one war with co2 cuz were getting a diven tank so we can fill our own. ok well thanks alot keep on reply'n though

[Team Chokepoint]

read the manual and stickies please.

[mgitlin]

read the manual and stickies please.
:tup:

but just for record sake in case some other kid looks here. There is no problem with A/S'd co2 if it doesn't get a chance to enter liquid form. The fault with A/S tubes is if you ever tilt your gun the wrong way while firing, it can become like a siphon-tube, and cause some messy problems (possibly blown noid seals if the liquid makes it that far).

The top-cocking piece should just pull out. If it's REALLY hard, you can loosen the allen screw behind the bolt and that will lighten the pressure on the bolt pin. Keep in mind, the lighter the pressure, the more likely that pin can come out while firing.

[austin-d-111]

ok i got the pull pin out so... thanks ok later