trubo and vision together

[XSycloneX]

ok, i've heard that they can and can't be used together. some1 clear this up for me. and how is the turbo adjusted?

[wolverine]

Tubro and Vision can NOT be used together. The Turbo Impulse was cancelled and replaced by the Vision Imp.

To adjust a Turbo Imp, there is an extra POT on the board labeled Turbo.

[XSycloneX]

thanx. i was in this argument with one of my friends. he said that his Impulse was vision and turbo. but i didnt think so. thanx

[Schwartz]

While on the subject...
I have heard that the Genesis board and vision boards cannot be used together as well.

SOmeone out there be able to verify that for me?

[wolverine]

Originally posted by Schwartz
While on the subject...
I have heard that the Genesis board and vision boards cannot be used together as well.

SOmeone out there be able to verify that for me?

You heard correctly, the Genesis and Smart Parts Vision system are NOT compatible. This is in the FAQ.

[alec3]

hey

right now i have a turbo impulse, if i wanted to install vision, i would have to replace my board, is that right??? And i would have to send my marker away to get the vision installed right. Or is that even possible? And if it was possible, what board do you suggest i get?? And what am I looking at to get my vision installed? and sorry, but one more question, is the I-Frame just a frame or is it a board to, or do you just install the board you have now into the I-Frame?

thanks, sorry about the questions

alec

[wolverine]

Your lucky I don't watch football, so I can answer these questions :D

right now i have a turbo impulse, if i wanted to install vision, i would have to replace my board, is that right??? Correct

And i would have to send my marker away to get the vision installed right. Or is that even possible? Correct again. Since your Impulse is a Turbo it is not Vision ready. This means that it is missing several openings needed to install the Vision kit. Check the FAQ for companies that upgrade Non-Vision Impulses to Vision.

And if it was possible, what board do you suggest i get?? This is easy, there are no choices. It's either get the Smart Parts Vision or stay with your Turbo board. I guess you could get a Genesis Vision but I would not suggest it. It voids your warrantee and can take 6 - 9 months to get installed.

And what am I looking at to get my vision installed? They will cut holes in your solenoid tray. Cut holes into the body. Install a new main board and daughter board. The daughter board connects to the Vision eye. There are a couple other small things too.

and sorry, but one more question, is the I-Frame just a frame or is it a board to, or do you just install the board you have now into the I-Frame? The I Frame is just a frame. It replaces the stck trigger frame and solenoid tray. You still use your own board with it. The I Frame is Vision ready.

[alec3]

hey


thankyou wolverine, the clears everything up


thanks

alec