low pressure

[Rob1313]

does anyone know what you need to run low pressure on your marker? i have a m98 and i was just going to get a vertical air adaptor and a regulator, but i don't know which regulator to get and i don't know if that is all i need to run lp, thanks a lot

[Phaelon Veritas]

go to pdppaintball.com

[ToiletSiphon]

1-You need a regulator. For co2 use, palmer stabilisator is the best. If you run hpa, buy a Vigilante.
2-You need a turbo valve to allow a better air flow
3-Polish you internal, it will help to reduce friction so you will be able to set a lower pressure.
4-You need a high flowing vertical adapter. I don't know if the one on the m98 is high flowing, but I think he's not. On my spyder, I enlarged the holes of the vertical adapter with a drill to get a higher air flow.

[ElectricHead]

what about a tornado valve? ive heard good things about those

[ToiletSiphon]

Yeah, I also heard a lot of good things. But they are expensive and won't help you to get you operating pressure very much lower.

[ToiletSiphon]

By the way, if you don't have an antisiphon tube for your co2 bottle, get one! Low pressure and liquid co2 don't mix well together...

[Rob1313]

why do you say the stabilizer is the best, there aren't any reviews for it

[Nemessis]

Because it is lol. No its because it is very consistent very high flow and works well with co2

[PsycHo AbE]

If it is labeled as a Palmer, it is good. Thats a name you can trust. They are generally more expensive, but they are the best.

[ToiletSiphon]

And it's what everyone says on pbcity.net...

[Paintball Monkey]

I agree that the Vigilante is one of the better regs for LP HPA. I use one on my Defiant, but you need to buy the LP spring for it in order for the reg to go LP, otherwise you will just have a HP reg.

[Nemessis]

Anyone ever seen the gladiator if i ever get around to making a custom cocker im putting a gladiator on