BSI sitck trigger

[MaverickSniper]

Will this BSI stick trigger work on the custom pro E?


http://www.anythingxtreme.com/ProMark-98-Custom-BSI-Stick-Trigger-Guards-P2087C0.aspx

[Canderous]

Yes, it should work quite well.

[MaverickSniper]

I think i am going to get (I have 350)

- Tippmann custom pro E(230)
- BSI stick trigger OR rufus dawg trigger(20-30)
- Freak barrel(90)


Other sugestions after that?


another question,
Do the WAS boards fir in the 98 custom pro E?
Do you need hpa to run them?

[Canderous]

Yes, they make WAS boards for the e-grip and you can use co2 if you need to. I might suggest getting a Rufus Dawg centerfeed installed any maybe a fast hopper, or regulator with vertical adapter. But hey, for all of that money you're dumping on a pro-e, I would maybe consider other markers like an ion or b2k with a cheap nitro tank.

[SEAL34]

Get the BSI stick over the RD. I've serviced 98s with the RD trigger and found them to be not at all durable, attractive, or at all quality. The BSI triggers, however, are very nice and will fit your Custom Pro quite nicely.

About the WAS board- Get it. It's a very fast board and pretty much your best potion for speed on your Custom Pro right now. Besides, the GTA Egrip is the same price and much slower. It will fit your Custom Pro, just be sure to get the kit with the solenoid. It's $100 at Wicked Air Sportz. (www.wickedairsportz.com) Keep in mind you will need a force feed system to keep your gun from turning into a blender with the WAS board. A centerfeed wouldn't hurt either.

HPA- Get it. Definitely in the top 3 upgrades. With the WAS board especially, you will get shootdown with C02. Although it isn't required to run the WAS board, it sort of is :confused:. Overall, get it, you won't regret it.

Here are some links to where you can get all the stuff I've mentioned.
WAS board (http://www.wickedairsportz.com/products.php?cat=24)
HPA tank (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/BrowseCatalog-Start;sid=k9Hf_b65kX7fVv0F-zwfVbQfWpufyT8IkAQ=?CategoryName=paintball-gas-systems-nitrogen-systems)
Hope this helped!

[MaverickSniper]

so when i get the was board I can run a/s co2?

where do i get a force feed system?

soo I should get W.A.S Center feed and power feed?



also SEAL don;t I need an e girp for the WAS?