NEEDED: List of all tools needed to fully strip an impy

[ME]

I think it would usefull to us new impy users if you guys could post a list of all the wrench sizes and allen wrench sizes and other tools needed to totally strip down an Impy & MaxFlow
Thanx :P

[mattimaru]

1/8 to get the trigger frame
1.5mm for blade triggers (dont know if its the same for others)
5/32 to get off --my-- ASA (may not be same as yours, i dont know why but it may not be the same)

thats all i know off heart

[Impy4335]

hands (any size) for bolt and bolt pin.
vice grips (rag between grips and gun, to prevent scratches) for hammer and valve cap.
hand for barrel, and hopper
+head screw driver for REvy

[Schwartz]

I just use a crecent wrench to remove the valve and hammer caps (of course with a cloth inbetween so you dont scratch your baby)
I havent had the need for a vise.

[DaCuban1]

the rest are normally sized allens....except for that damned bottomline max flo, you need a 3/8. About the biggest hex key I've ever seen.

[lenny3683]

7/8 for the front cap and the hammer

[johnnyrotten]

Get you a set of jewelers screwdrivers $7 , A Husky allen set from Home Depot for $20( it has both Metric and Standard allens) A Craftsman 6" Wide Jaw adjustable wrench $11, Some Blue, Red and Green Loctite. Dow 33 lube and you should never need anything else

[Impy4335]

I just use a vice for everything, cause thats what I got, use a crescent wrench if you want. All mine have been left outside by brothers, and are all rusty. My vice grip is well taken care of, so thats what I use, and that 3/8 is the biggest Ive seen too, I had to take 2 allen keys together to get that off, I dont have anything that big by itself

[johnnyrotten]

The Husky set has sizes from .050 to 3/8 standard and metric from 1.5 to 10mm

[ME]

Especially you johnnyrotten great help so heres the list i have:

1. 1 set of both standard & metric allen keys
2. 1 set of jewelers screwdrivers
3. 1 6" wide jaw adjustable wrench (try to find some with rubber guards on the jaws)
4. 1 pair of thin needle nose pliers


Anything to add please let me know;)