PDA

View Full Version : my halo was bieng bad


july_favre
02-02-2002, 04:37 PM
first off let me say I dont want anyone to decide not to buy the halo because of what Im going to say. Im not bashing it at all and I may have a defective one since everyone else is having such good results.

I got my halo yesterday and used it today for the first time.I have an anti chop eye and I was getting quite a few chops. So I turned the eye delay time up and it didnt help much, so I did it again and it helped a little bit as long as I didnt fire really fast for mroe than a few seconds.
Without changing anything but the hopper, I changed to my inelli rev. I let loose on the trigger and fired in full auto and had no chops. I cut the eye delay time in half to what i normally play with and still had no chops. I could tell a very noticable decrease in rof when I put the halo back and had some more chops. So when I put the rev back on and let loose, with no chops, I asked my friend if he thought it was faster- "It is faster, its obvious" he told me.
I eventually put my rev back on and had no feeding problems the rest of the day. Why I chopped so much with the halo has got me stumped. Next time between the 2 hoppers I have, Ill use my intelli rev.

Load SM5
02-03-2002, 06:42 PM
I've heard this from a few angel owners. The HALO, being more of a force feed hopper, is actually pushing balls past your detent. You may just need to screw your detent in a little further.

Hopefully that's the problem. If not I hope you get it figured out.

july_favre
02-03-2002, 07:18 PM
Thanks for the tip, Ill try it out to see if it stops the chops.
That still doesnt explain the slower feeding though.

Load SM5
02-03-2002, 07:23 PM
I'd e-mail the guys at Odessey. They are really good about getting back with you.