aka 2-liter question

[p8ntballer30]

Hi i have a question with the aka 2-liter reg. Which one do i want to get for the promaster the

aka 2-liter plus high pressure

http://www.compulsivepaintball.com/itemdesc.asp?ic=15950

or the aka 2-liter plus low pressure

http://www.compulsivepaintball.com/Itemdesc.asp?ic=15563&eq=&Tp=

or just the aka-2liter

http://www.compulsivepaintball.com/Itemdesc.asp?ic=11393&eq=&Tp=


i have a crossfire 70ci 4500 psi high pressure tank but im not sure which pressure regulator i should get.

Also does the aka 2-liter need to cleaned a lot and how easy is it to clean?

Thanks!

[pr0xy_dA3m0n 1]

i think it should be a low pressure, cause the promaster is a low pressure operated marker.

[Lopez17]

While the Promaster is a Low Pressure Marker, it really doesn't matter which reg you get as the 2-Liter Hp and Lp overlap in terms of range (0-300psi and like 150-600 psi or something similar). I have one of each on my Intimidators and there's no difference. They both knock the pressure down to the appropriate pressure for the marker to handle it properly. I recommend getting it from www.airsoldierproducts.com

[p8ntballer30]

So if i get the low pressure one my gauge should be reading around 300? and the link comes up to an airsoft link

[lotus_esprit5]

^your gauge will read whatever pressure you set the 2-Liter to.

the LP one regulates pressures between 0-300psi, the HP one between 150-600psi. those are each one's optimal ranges. Since the Promaster operates around 250psi, which is inside both of those ranges, you can get either reg. both are able to operate at the correct pressure for the promaster.

here's the correct link. www.airsoldier.com great place to buy from

[p8ntballer30]

ok thanks ill be getting the LP one