is the 'tippmann e-grip' the only electronic firing kit you can get for a custom pro?

[poisonspider]

is the 'tippmann e-grip' the only electronic firing kit you can get for a custom pro?


And

If I do get an electronic upgrade, I know it will be already more sensitive then my stock gun, but is there anything that will allow me to walk the trigger even better? such as a new trigger perhaps?

[Tom_D]

There is also an E-bolt, they are out of production so they are harder to find.

There are a ton of trigger mods out there, do a serch for lightend micro-switch, and trigger stop. That should get you started.

[poisonspider]

There is also an E-bolt, they are out of production so they are harder to find.

There are a ton of trigger mods out there, do a serch for lightend micro-switch, and trigger stop. That should get you started.


If you can direct me a little bit to this information I would be very happy

I will look and did look for 1 minute already but sometimes I dont end up finding it.


also I know their is an e-bolt.

does anybody else know of any other kits? the tippmann a5 has like 3 of them I think

[Tom_D]

Ill, give you a few tips on searching. Kinda "teach a man to fish" type thing.

Start by clicking "show threads from the begining" in main forum window.
Next, Use the advanced search option.
Select the option of search only in thread titles.
Make sure your forum selector has the apropriate forum selected. In this case "Tippmann"
Then try your search.

This works ninty percent of the time. You may have to flip back a few pages, but most likely the info you desire will be in there. The other ten percent you can find by looking up in the apropriate stickey.

[Raleigh Allen]

Ebolt
Egrip
Egrip w/ WAS board
Other boards for Egrip

Thats all I know of, but try searching.

[Jon Crane]

on www.firstcallpaintball.com (http://www.firstcallpaintball.com) they have the WAS board for the E-Grip. Equalizer board for Tippmann A5 and Pro-E markers. This is a drop-in replacement for the stock E-Grip and Pro-E electronics. Includes new removable solenoid (not shown in picture). Rate of fire is adjustable from 8bps to 30bps! Easy trigger programming and support for NPPL, PSP, and NXL firing modes! Yes, this is the same board that Tippmann Effect has been dominating with all season! Go to the guns section under Tippmann and it will be on the right where the items are.

[tippyjack]

You can only buy an egrip for the custom pro, and add a WAS board, or APE board. For triggers only gta makes triggers and APE is starting, I also make custom triggers for custom pros.

The ebolt will not fit in the custom pro with out modding to the grip frame and board. I am tuning/working on a TE marker that has an ebolt and there was significant moding to get it to work.

[Raleigh Allen]

The newly manufactured Egrips come with a Was board already installed, no extra cost.

[poisonspider]

The newly manufactured Egrips come with a Was board already installed, no extra cost.

where did you get this information

[tippyjack]

It is a rummor, and been casing alot of problems. The was board is worth $80 alone, they wouldn't include it for free.

[no_pain_no fun]

or you can buy an amiture pin and sear from tippmannparts.com
then buy a rampage board with a solenoid or a WAS board with solenoid

[poisonspider]

or you can buy an amiture pin and sear from tippmannparts.com
then buy a rampage board with a solenoid or a WAS board with solenoid

yea you told me that in other thread. thats what I am going to do. it will save a lot of money

buy the way

what do these 2 features do - of the ape trigger 1)Ball Bearing Pivot Point (I assume this is meaning that there is no pin you slide through the trigger so less friction = better sliding)
2) Two-Way Adjustable (i haven no idea what this means)

I was thinking of also getting it because someone said it would help me "walk" the trigger better then the stock one? how would it do that

[no_pain_no fun]

ajustable means it can ajust by the swith and by the power tube
and the ball bearing point is just like the trigger for the ion it is easier to walk it slides easier

[Tom_D]

Two-Way Adjustable (i haven no idea what this means)


Usualy this means that you can adjust where the trigger physicly stops and where the trigger returns to at rest to give a shorter trigger pull.

On the higher end guns you can also adjust where the trigger pivots from, and the trigger pull force. I have absolutly no idea why they don't make a grip frame for blowbacks with this kind of adjustability.:pissed: I am sure the Tippmann speedballers would love the kind of adjustability the $1000+ guns have.

[poisonspider]

dont high end guns use magnetic triggers?

[Tom_D]

yeah