BIG Problem

[Grand_Masta!]

Man im pissed. i put a gauge on my sts g3 and now i have one big *** leak coming out of the threads. Some one help me out here. any advice will do. I put leak sealer on it too and it still didnt work . AHHH!!!! i dont want to get another ASA either.
What should i do?


----------------------------------------------------------
Gun Setup
----------------------------------------------------------
Piranha sTs G3 verticle feed Titanium
Dye Boomstick
pure energy regulator
20 oz C02 anti-syphon
12 oz C02
WGP black Magic drop forward
9 volt revy
Pure energy gauge
did a trigger mod also



:pissed: :pissed: :pissed: :pissed:

[infil]

Put a new gauge in it.

[orryn]

take out the gauge and have someone loctite it. This solves almost all leaks. Either that or use teflon tape.

[Vaypourus]

Don't use loctite..that will make it permanantly there. Then, if it is a is the gauge, you will have to buy a whole new asa and gauge.

Put a few wraps of teflon tape on, screw it in snug, and give it a try. It very well could be a shot o-ring in the asa as well.

[sniper_dude]

actually loc-tite is much better...remeber though...the red stuff is for welding and the blue is for sealing....only the blue stuff is removable in the future

[Creek]

liquid Teflon is better than tape. You can get the thing apart if you use red ,but you have to heat the thing up and the gage be toast