how to adjust blade

[peacekeeper]

hi i am having alot of trouble adjusting my blade trigger and i am going to play this weekend at my local paintball field (high velocity) so i need to figure this out.
thanks
dave

[Impy4335]

to adjust your blade: use those little screws, turn with a 1.5 millimeter allen key. (I know you know that, but I just wanted to tell that to the world. I dont know what else to tell you)

[Wintermute]

What exactly about the trigger needs adjusting?

[peacekeeper]

well whenn i tried adjusting it last time i adjusted the bottom one but when i did it woul not shoot

[Impy4335]

back the scerw out

[-RuShPB227-]

I had the same prob, you have to adjust the top one so it touches the micro switch. With no air attached and the marker is degassed, turn on your gun and screw in the top screw until the led blinks and you hear the solenoid. If you turn your gun on and the light stays green, your blade is in too much, back it out. If you need any more help, ask. You will also need some blue loctite to hold the screws in place.

[wolverine]

There are instructions in the FAQ that list in detail how to adjust the different Impulse aftermarket triggers.