Can you guys help me with this Hammer Problem??

[DrunkSnowlet]

Hey guys, now heres the problem, i dont know how but my friend did something to the hammer when he was cleaning the impulse and when he put everything together the hammer dosent move, i thought the pull pin wasent in right but that wasent the problem, now can you guys help me figure this problem out? THANKS

[Killer Kat]

You've gotta tell us a little more? Does it move whaen you've got it out of the marker and in your hand, or just when it's screwed back in place?

[DrunkSnowlet]

Sorry, the hammer is screwed in and it dosent move. The Pull Pin gets stuck by the hammer. I dont know why the hammer dosent move.

[-RuShPB227-]

take it out and put it back in, mines gotten stuck before.

[DrunkSnowlet]

I cant even screw it out. I dont know why i cant even screw it out. I keep screwing it and screwing it and never screws out. It like stuck. Maybe when i screwed it our halfway and screwed it in again, that might be the problem. Can anyone tell me if thats possible?

[PBSouLjAh]

dude u unscrew it and then u gotta pull it out.

[Weasel00]

Unscrew the hammer until it doesn't come out anymore then pull it out the rest of the way. Make sure there is a little plastice bumper in between the hammer and the ram body. The ram may be going back to far and getting stuck. Locktite may have also go on the ram and seized it up. When you get it apart try and pull on it to see if you can get it to move.

Jared

[DrunkSnowlet]

Ok its fixed, I didnt know you had to pull it out hard enough to get the hammer out. I pulled it out and it came out and i cleaned it and screwed it back in and it now works. Thanks for your helps guys!!