Need Help rebuilding a tippy 98!!!!!

[paintballa665]

Ok, I had a tippy 98 custom, but I sold it and got an ion. Now I want another woodsball/backup speedball gun. So I want to rebuild this tippy with all upgrade parts. Barely any stock parts unless the parts that have to be stock. NO FLATLINE BARRELS!!!! Pkease try and follow this form below:

Barrel-
Bolt-
Trigger (needs to be light and fast)-
ASA or drop forward-
Reg/expansion chamber-
Endcap-
Feedneck-
Springs-

Anything else please post. Thanks, paintballa665

[pbrebel]

Barrel - J&J Ceramic
Bolt - Stock (Don't waste you money)
Trigger - Rufus Dawg
ASA - Smart Parts Rail and On/Off... Unless you have a BIG tank. Then a Shocktech Drop with the On/Off
Reg - Take you pick. The differences in the quality ones (CP,Palmers, Etc) is just a personal preference. I use an Empire that is shimmed up to hit the pressure needed by my tippmann
Endcap - Stock (See Bolt)
Feedneck - Go with a Cyclone. No batteries to fuss with!
Springs - Don't have an opinion.

This my thoughts on the matter. Always remember, that marker part choices are like flavors at Baskin-Robins. Nobody is wrong as long as they are happy with what they get.

Chris Walker

[..!..('_')..!..]

Good, except the Endcap would be better as a Rear Velocity Adjuster, like a Spyder... I hate Tippmanns Adjuster... Or one of those Cocking things that make it look like a Cocker.... I think those look so cool on TIppmanns...

[paintballa665]

I have a cp reg on my ion, so if I just switched it on my tippy wen im not usin my ion, will i have to keep adjusting it?

[..!..('_')..!..]

Probably, because I think they operate on totally different pressures...

[paintballa665]

ok. Is there a difference on accuracy with the j&j ceramic and the j&j ceramic s2?

[..!..('_')..!..]

I think just looks, but Id go s2. Newer is always better...

[paintballa665]

aight, thanks. So do u agree with pbrebel with all them parts? or do you have nethin different? Also any other areas that i forgot please tell and post an upgrade to get. Thanks, paintballa665

[Zakushark]

...an e-grip would also be a worthy investment.

[..!..('_')..!..]

Well, Id say Rear Velocity Adjuster or the Cocker Cocking System (its name escapes me at the moment..) RVAs make it easier to adjust velocity, and the Cocker Cocking System just makes it look super sweet...

[synkronics]

barrel-lapco bigshot 8 in
bolt-useless
trigger-rufus dog stick trigger and response trigger
asa drop-get a remote is you get a stock or else a smaall on off one
reg xchamber-tippmann one
endcap-a folding stock or rva
feedneck-cyclone feeder
springs-i dont know if you can get any

[..!..('_')..!..]

Actually, go Retro and get a Ebolt... And sknkronics, You need a bolt or it wont fire... ;)

[senghing27]

You SOLD the 98C I worked on!!!! HOW COULD YOU!!!???




Thats it, this relationship, is over.......:dodgy:

Get a Full boar rear shadow cocking kit, definetly worth the money. All other stuff, well it's meh...

[..!..('_')..!..]

Thats it! The Full Boar. Thats the cool rear cocking system. I was going to say black Boar...

[paintballa665]

sorry senghing, i need to sell it for money to buy anj ion for my team, but now i feel so lonely without my 98 custom for woodsball. So sumbody please summarize all the upgrades i should get. Thanks, paintballa665

[senghing27]

Thats it! The Full Boar. Thats the cool rear cocking system. I was going to say black Boar...
It's a very nice system, flush cocking and it's just amazing. RVA and cocking system, and hammer protector all in one...
Too bad they're a pain to find now.

[..!..('_')..!..]

Too bad there the sexiest beasts in the world... I would put one on but there so hard and my twins cant take them, one has a Stock, and the other an Ebolt...

[senghing27]

Oops, Compy lag post.

[..!..('_')..!..]

Why did you post the same thing like 40 minutes later... lol...

[vercingetorix]

Newer is always better...

No so my friend:)

It has been years since I had a 98, but are the endcaps aluminum? If so, he could make his own rva by tapping out the endcap and putting in an allen set screw. He could then buy a shorter velocity screw that could be turned flush into the valve body yet not protrude too far into the valve. This ought to boost efficiency; it works great on one of my 68 carbines.

[..!..('_')..!..]

The Empire Strikes Back is WAY better than a New Hope... So there... ;)

Go Full Boar. Ive never realy known a person that had one though...

[paintballa665]

Ok, so I'll go full boar. Is that everything I should get? Anything else that I should get that will increase performance or efficency? How bout the dark horizon lite titanium hammer? Thanks, paintballa665

[vdubdriver]

Ok, so I'll go full boar. Is that everything I should get? Anything else that I should get that will increase performance or efficency? How bout the dark horizon lite titanium hammer? Thanks, paintballa665

It's supposed to be sweet but for woodsball I would consider it a bit of a waste. Don't get a cyclone. It's not worth it. Get a Rico e-hopper.

[DeathKobra]

Barrel- 16" Empire
Bolt- Stock or SuperFly
Trigger (needs to be light and fast)- The Double finger trigger (tipmann)
ASA or drop forward- 32 Degrees Drop forward W/ on/off
Reg/expansion chamber-Tipmann Exp.
End cap- Stock
Feed neck- Cyclone. No battery's.
Springs-They should sell a spring kit at your local Pb Field.
Gas- A 72ci 3000psi Pure Energy tank.

[paintballa665]

DeathKobra, I know a lot about a tippy 98, nd those choices you jus picked, do not sound ne good at all. First off, why would u use compressed air with an expansion chamber? lol, ne1 else?

[Eller]

Barrel - J&J Ceramic S2
Bolt - Stock, don't waste your money
Trigger - Whatever floats your boat, Ruffus Dawg seems to be popular.
ASA or Dropforward - Remote line FTW!
Reg/expansion chamber - ACI Sub-Zero 6 stage, Tippman, DOP X-Core 8 stage, or else a Palmers Stabalizer (stab is better, but costs at least 2x an x-chamber)
End cap- Rear cocking system, or RVA, whatever you like best.
Feed neck- Cyclone for the win. It'll feed as fast as you can shoot, doesn't chop, and best of all, NO BATTERIES!
Springs - Not really sure
Gas - 20 oz on a pack.

Might also want to consider getting an E-grip (if it's a new 98C) or an R/T.

Eller