A-5 Trigger Problem

[shudokansam]

Lately my stock A-5 Trigger has not been working correctly.

Everytime I pull the trigger, it shoots, recocks and then the tirgger will not fire again...

the only way I can shoot again, is if I: Push the Trigger to the Left, Push the Trigger Forward, or Pulling the Cocking Handle back Slightly.

The Gun does not leak, nor is the gun NOT cocked.

I believe there are no part missing, and I have Oiled and clean the gun to perfection.

Whats the Problem?

[TheSpy11]

Is this the mechanical trigger frame?

[shudokansam]

What did I Say?

STOCK= Mechanical

[TheSpy11]

It could also mean stock = e-trigger. The "stock" could mean the trigger frame or trigger itself. I read your post thoroughly and wanted to make sure I had it right. Is there a problem with that?

Pushing the trigger forward to be able to fire again is odd. It should do anything when pushing it forward because it the trigger should automatically return to the most forward position possible. Have you ever taken the trigger assembly out of the grip for examination? If so, are all the springs still stock? Even if you haven't messed with it, I would take it apart and check for problems. Cross check with the manual to make sure everything is in the right place.

[shudokansam]

I have taken it all the way apart and all the springs are stock. When i push the trigger forward or to the side it makes a click small click but then its fixed

[SicilianFool]

Did you use the lightning trigger modd, where you put tape on the sear pin?

[shudokansam]

No, No Tape Anywhere...............!

No Mods of any sort