custom pro question

[westsidebb]

hi guys, new to the site and new to paintball. i recenly bought a custom pro with act and an e trigger. upon turning on the gun the led is a solid orange then a solid red and then flashes green while the marker is on. the manual said the polarity should be set to green for an A5 and red for a custom pro. now does that mean it should be blinking red after the first two light come on or is it ok since it did turn red right after the led first turned orange? sorry for the long question and hope this is in the right section.

[TheSpy11]

Yes, this is in the right section. The answer is in your manual although I don't think mine blinks the right color either. It's supoosed to blink orange, but my A-5 model blinks green. By the clues you have given, it sounds like your trigger is properly polarized. Is it working like it should? If so, you're fine.

[ICU117]

My led blinks green, and so does my friends, so I think ours are ok Spy ;)

[westsidebb]

thanks guys, i used it this past sunday with no problems but it did keep blinking green, even though the manual says green is for the A5. thanks again.

[ycfan456]

If it works fine then it's no biggie.