Questions about replacing maxflo with a standard reg

[grenadegloves]

My friend wants to replace his maxflo tank with a regular tank. I know he will need to change his Gas through grip to a regulator. Does this need to be a HP Regulator, and will a stock ion reg work for now?

[alpha20]

Well I certainly wouldn't use a stock Ion regulator. Wait for awhile, then proceed to put on a stock vertical max-flo or any comparable regulator. The Ion regulator will work, however, if you are just doing a ghetto fix.

You have to add a duckbill for your tank, route the macroline to a regulator that will regulate 850 PSI down to 200-ish, and have it all in tightly.

[Yakb0]

you'll need a vertical adapter in order to use a normal inline reg. The gas-through grip screws into a 1/8" hole in the body..the vertical adapter lets you use attach a normal reg to the gun.

[alpha20]

Oh, good call. Forgot about that.

[grenadegloves]

alright thanks, the ion reg would just be temporary, hes poor :rolleyes: i wasnt sure if i needed an adaptor or not, thanks