Best e-grip settings for A5?

[RuneFire]

I searched the forum a bit for info on this topic and couldnt find any, so...

What's the best dwell/debounce settings for the A5?
It had the WAS board, by the way.


Thx

[Coenen]

They will vary from gun to gun. Generally you want both to be as low as possible and still have the marker firing one shot per pull in semi auto.

So, just get a tank of air and start adjusting.

Debounce, start as low as possible, bump the marker firmly on the tank, if it fires more than 1 shot bump up the debounce. Once you've got it down to one, or no shots, start pulling with one finger as fast as you can adjust to remove bounce. Now, the slow pull test, pull the trigger fully as slowly as possible, adjust as needed. Lastly, walk the marker at a slow to moderate speed if it's adding shots bump up debounce, if not, leave it as is.

Have a ref at your field or at any semi-only tourney you go to test the marker before trying to use it.

[RuneFire]

The dwell is the amount of air it lets out through the bolt no...
Debounce is not really a problem, stock should be fine. I'm not going to roping balls at any time.

It's more the dwell settings I'm interested in :)