need help asap with my ndfs7 and nox reloaded

[turmoil9008]

ok i just got my first freestyle and i need to know a few things because the guy that i got it from is a complete idiot so i really need step by step instructions on how to

change the nox reloaded board from demo mode to psp capped

and i also need to know how to balance the regs and what the gauge on the side of the gun should be reading
(i heard the reg balancing isnt like matrixs or timmys and thats really all ive ever dealt with so any help is much appretiated)

if it matters its a nd fs7 with hr1 bolt cp reg and other ups but those should b the only ones that matter

[lawnboi]

go to pbnation and read the stickies there, they will tell you everything you need to know about rebalancing and such.

[Schosama]

ok i just got my first freestyle and i need to know a few things because the guy that i got it from is a complete idiot so i really need step by step instructions on how to

change the nox reloaded board from demo mode to psp capped

and i also need to know how to balance the regs and what the gauge on the side of the gun should be reading
(i heard the reg balancing isnt like matrixs or timmys and thats really all ive ever dealt with so any help is much appretiated)

if it matters its a nd fs7 with hr1 bolt cp reg and other ups but those should b the only ones that matter
I'm not sure about NOX boards, but if I recall they're changed by trigger clicks (like Predator). If you go to the manufacturer's website you should be able to find a manual or tutorial.

As for balancing regulators: The operating pressure is around 320 psi. Put something hard in the feedneck to block the bolt, and lower the LPR all the way (turn it all the way counter clockwise). Gas up the marker. The bolt should press against whatever you stuck in the feedneck.

Take your allen keys and set the HPR to 320 psi. Then *slowly* turn up your LPR until the bolt clicks back, and then give it another quarter turn. If the marker starts to leak out of the solenoid, lower the LPR.

Then you should be set. The marker's velocity is controlled by the pressure, so if you're above or below chrono you'll need to rebalance both regs.

[lotus_esprit5]

www.buynox.com the nox reloaded manual should be on there