need alittle help plz.

[eatmybob67]

i played just the other day every thing ran smoth no probluems. i get back into the house lube up the hammer and put it back together. today got my tank filled and to make sure i didnt do any thing roung i aired it up. for some reason its now leaking down the bareal. i took every thing apart again made sure that the hammer was screwed on right after i put every thing back together. i noticed tho that there was alittle tension when i put the clam shell back togetther. i looked in and found out that the valve spring was pushing on the hammer abit. does it suposed to this? and how do i fix this probleum. oh also when i turn the lpr off so it doesnt recock it stops the leaking. but when i turn the lpr up it starts leaking when the bolt is about 3/4 of the way cocked.

thanks

[eatmybob67]

never mind i fixed it

[lotus_esprit5]

you dont really have to lube the hammer

[eatmybob67]

really. good that will save me alot of time. but i thought sence its metal on metal a little lube would help it to move.

[Leisy85]

what was the problem?

[eatmybob67]

i think it was the hoses going to the noid. i just dry fired the **** out of it becuse it was making me angrey. and after that it stoped.

[lotus_esprit5]

well no i lied, sorry. dont have to lube the ram shaft. on the hammer just apply a tiny bit of lube, and then basically wipe it off. leaves a very very thin amount of lube on the hammer, which is all it needs. you dont want a bunch of lube in that tube collecting dirt and such.

[eatmybob67]

alright well thats what ive been doing is lightly lubing it.