The promaster

[GBPrebleWR3]

Already, I was looking at buying a good and trusty speedball gun for no more than 400 dollars overall. I thought the Promaster for $250 looked like a good deal, then I plan on buying the 2k5 on/off asa off of www.customproducts.us (http://www.customproducts.us) for $35, and a vlocity loader for about $130. I really think this all sounds good, what does everybody think??

P.S. It's my first electronic gun, moving from an A-5 that just..is a lot slower

[lotus_esprit5]

sounds good. but just so you know, the CP on/off ASA requires a rail in order to mount it to the gun. thats another $20. or you can get the CP Direct mount on/off ASA, which mounts directly to the gun and is $50.

if you want a similar but cheaper alternative, New Designz makes a rail and on/off ASA, which are sold together for $40.

[Leisy85]

Look into to a new reg, the stock one is ok but a new reg will help alot.

[lotus_esprit5]

a new reg, barrel and clamping feedneck are great early upgrades. but the setup you have there is great for starting out, and i would recommend playing with the gun stock a few times first before upgrading it. however, it might be a good idea to buy a clamping feedneck right off the bat, as the Vlocity might not fit in the stock feedneck without sanding (it is better to buy a clamper and leave the hopper feedneck unsanded). but thats up to you. www.akalmp.com has ICD threaded feednecks for $25, cheapest ones ive found, and they're AKA so you know they're quality.

[paintbala5]

yea if u do buy the vlocity u need a clamping feedneck because the feedneck on the gun is too big. i use a vlocity too

[Cearp09]

I have a Hyper Two and i get +/- 1/2 a fps its like driving tacks when I shoot.
I also have a Superfly Bolt and an Empire Twister so that might play a part in it. Also, takw the spring out from your trigger and move it back a notch. Its the sickest pull on the market.