PDA

View Full Version : Omen questions

Time_2_Dye
10-13-2006, 06:59 PM
Ok my omen will not cock and i dont know why? I think its because of the battery but i am unsure. Another thing i was wondering is that if there are eyes for the omen or are there eyes comming out with it?
Massloki
10-13-2006, 11:42 PM
Ok my omen will not cock and i dont know why? I think its because of the battery but i am unsure. Another thing i was wondering is that if there are eyes for the omen or are there eyes comming out with it?

My best suggestion is to read the manual, there it tells you how to properly set the recocking on the gun. This involves the alen wrench and the little set screw on the side of the omen.
bballryand316
10-14-2006, 05:36 AM
do you mean you cant pull it back and have it stay cocked? Or you have to use it as a pump - 1 cock 1 shot?
Time_2_Dye
10-14-2006, 12:28 PM
cant pull it back and have it stay cocked
bballryand316
10-14-2006, 01:37 PM
Hammer plate or sear. My sear is messed up, might need a new battery is all.

Hammer plate, look here:
http://www.pbnation.com/showthread.php?t=1790143
oofox99
10-14-2006, 03:05 PM
dude...read the manual first...

The recock screw must be turned into the gun all the way untill it sits on the valve inside the marker. now recock the rod, connect the air and start the gun up. When your ready pull the trigger...if it doesn't cock back, turn the recock screw out a 1/4 or a quarter of a turn out...and recock the rod and ee if the gun shoots and keeps recocking...if it does not...turn the recock screw out another quarter of a turn until the gun keeps cocking by its self...it's not hard at all.
bballryand316
10-15-2006, 06:41 PM
Uh, NO! If its not catching the sear [the hammer plate], it has nothing to do with the manual or the damn recock pressure
Sheps
10-16-2006, 07:15 AM
Replace your sear, the sear spring should hold the hammer in place, and so it has nothing to do with battery.