I think.... I'm going to cry, help.

[Snowman282]

Ok so recently I traded my NME for an 04 ND freestlye. I love it but it needed some tuning so I balanced the regs and she shot beautifuly... but the trigger just didn't feel right, so I took apart the frame moved the pin to the first hole on the frame and trigger...felt better, put the frame back together, battery, grips, switched it on.....noid doesn't click.
Help anyone?

[liltippmanguy]

how about sending it back to ICD? i wouldnt try to fix it if i didnt know what was goin on..the most i did to mine was take off the eye cover and clean the detents..and take the bolt out and clean it,and place it back in.

[Snowman282]

For an almost three year old gun? I'll let the local shops take a peek at it first. Will ICD even work on a gun this old?

[lotus_esprit5]

yep, I'm sure ICD will work on any of their guns. you could probably send them a Desert Fox and they'd take a look at it (although I think the warranty would be expired so it would cost ya :P).

are you sure its not just the eyes preventing it from shooting? turn the eyes off and see if that fixes it.

also try changing the battery, make sure the board is plugged in all the way, and that the trigger is activating the microswitch properly.

if none of that stuff helps then it may be a pulled wire, in which case it might have to pay a visit to ICD or the proshop.

[pb4fun]

Make sure the screw is even tripping the microswitch... Also, check to ake sure no wires are pinched or broken...

[Snowman282]

Lotus: I turned the eyes off, atleast I think I did.... I pulled the trigger before I turned the gun on..... that worked when the gun worked. My friends gunna go over the board with a voltage meater and see were the power stops, if I dont figure something out friday I'll bring it to the shop.
Nope microswitch clicks and releases... and no noticable pinchs.

[adriann22]

You did put a new battery in it right?

[Snowman282]

Yup, it turned out to be the board...all fixxed.