Need Help

[Scenario_Baller]

I need help. I took my Tippy 98 w/ response trigger apart. Everything popped out of place. I'm not sure where everything goes in it. IF I can't fnd out how to fix it, can stores fix it for me? If so, about how much will it cost?

[dukedude4evr]

yea anyone can fixx it, it isn't that hard, just stick the springs where they should go.

[xxxnewjerseyxxx]

WOW, i thought i was the only idiot who did this [no offense]. I had taken my 98 apart (at that time I didnt have an RT) and pulled the frame off too quickly and carelessly. I ended up losing a few springs and the sear was bent. First, it is always smart to know the pnumatics of your marker, which is why i take my tippy apart very often. If you don't have a manual, download one and look at the chart. When I did this and was unsuccessful [due to lack of parts], i took it to my local shop and for $15 dollars, they put everything in and charged none extra.

Hope It Helps,
Ant

[Scenario_Baller]

The problem is I don't know where everythinmg goes. LOL I geuss my best bet is to see if my local store can fix it.

[Scenario_Baller]

I found a manual at tippmann.com. I can see what I was putting in wrong places when I was trying to put it back together now.

[dukedude4evr]

i have done it, i did it my first time, i lost the act and power springs, had to put back them in the places, got lucky and did it, just remember what to do and where to.

[Scenario_Baller]

I got everything in the right place now, but I don't know where the sear goes. does it go on one of the silver sticks in the gun?

[auto a5's]

Yea it goes on the pin closest to the rear bolt with the little u type thing for the sear spring. Then in rests on the one beside it.
http://s89.photobucket.com/albums/k237/tippypballer/?action=view&current=Markerpics007.jpg Thats what you should be looking for.

[Scenario_Baller]

thanx for the pic

[Scenario_Baller]

I got almost everything in the right place now(I think). There is a little orange plasticish/ruberish peice that I don't know where to put it though. Where does it go?

[bvdave]

thats your ball detent, it goes in the front on bottom where paintballs load in to stop them from rolling into the barrel, easy to put in when you look for it as there is a section that it fits neatly into, just look in barrel area just before threading.

[pbmike1888]

the first time is always the toughest. the first time i opened my tippman the sear spring flew out and hit me in the eye. do it over and over again when you get bored. i can field strip my tippmann in a couple minutes.

[Scenario_Baller]

I got everything in place based on the pictures I've seen, but it still don't work. I think I might be missing something.

[bvdave]

whats not working?

[Scenario_Baller]

I can't cock my gun.

[bvdave]

dont suppose you could take a picture of the inside?

[auto a5's]

http://s89.photobucket.com/albums/k237/tippypballer/?action=view&current=Markerpics006-1.jpg Thats the front assembly so you know where everything goes. The yellow stuff is paint don't mind that.

[pbmike1888]

we need a pic of the back. where all the pins and springs and the bolt is.

[TippmanUsr4lyfe]

effin goto google videos and put in 98 custom fearpaintball.net has a good way to do it then whatever they dont show you use the manual

[Scenario_Baller]

I gots everything fixed and my internals lubed for $13 at my local store.