PDA

View Full Version : do any one know how to set up a 22 scope on a custom pro

a_to_the_5
12-03-2006, 11:40 AM
i though it would be cool to put my 22 scope on my cpro but i dont have the slightest clue how 2 and also i have a flatline barrel
PTE. O'Hearn
12-03-2006, 03:25 PM
If it uses a waver style rail it will fit. But if I were you, I would not put a scope one your marker, because they don't help.
TheSpy11
12-03-2006, 03:50 PM
If it's like a 4x15 scope, then its worthless. Even a large scope is worthless in paintball.
^Andrew^
12-03-2006, 04:35 PM
It has to be a 3/8 dovetail mounting system. You my have to get more rings for it if its not 3/8 dovetail.
a_to_the_5
12-04-2006, 02:06 PM
its a 3/8" but i dunno if its a dove tail
AngryInsurgent
12-04-2006, 02:21 PM
Duct Tape

It can attach anything to your gun, it just might not look that good (especially if your going for the milsim look.)
a_to_the_5
12-04-2006, 02:27 PM
lol the point im putting on my gun is for an intimidating look lol not laughs
Head Hunter 221
12-04-2006, 02:50 PM
Buy a Rail for what ever style the scope rings are (i.e weaver) and mount the rail on the gun, then attach the rings to the rail, place the scope on the rings, line it up and make sure it is straight up, put the upper half of the rings on and, viola another paintball gun withh a useless scope on it:wink3:
Dese
12-04-2006, 03:45 PM
If its the flatline, then you will need 3/8" Dovetail scope mounts. $5-$10 at your local hunting store.
a_to_the_5
12-05-2006, 04:29 PM
its a weaver lol but i dont understand what head hunter was tellin me how to lol
Dese
12-05-2006, 05:34 PM
its a 3/8" but i dunno if its a dove tail

its a weaver lol but i dont understand what head hunter was tellin me how to lol

If its a weaver its not 3/8". Unless they make 3/8" weaver rails, but I'm pretty sure they dont. Weavers are bigger then that.
a_to_the_5
12-05-2006, 05:44 PM
which ones have the half semi circle to mount on that is the one it is which to my understanding is a weaver? i think lol
Dese
12-05-2006, 06:10 PM
Mmmm, go to http://www.opsgear.com/Tippmann-Model-98-M4-Hand-Guard-Raised-Rail-System?sc=22&category=298
In the picture the rail on top is a weaver rail
^Andrew^
12-05-2006, 06:23 PM
Can you put a link to the sight you have or you're going to get?

P.S. Did you read the PM I sent you? Feel free to ask me any more questions.

P.S.S. Is your name referring to the A5?
a_to_the_5
12-07-2006, 03:36 PM
sorry i havent been on for a while but i been busy its a rifle scope for a .22 calibire rifle i had for target practise i cant find a pic of the scope but here is one with the same mounting brackets.
a_to_the_5
12-07-2006, 03:38 PM
P.S.S. Is your name referring to the A5?[/quote]
yes my name refers to the a-5 you like it im not a fan of it though because the cyclone gets really annoyin cpros rock:)
Dese
12-07-2006, 04:43 PM
Yeah, I'm pretty sure that those are dovetail mounts. Is the space between the backets 3/8" or bigger?

If they are 3/8", they will fit right onto the dovetail on top of the 98 flatline shroud. But like I said you can easily find brackets to mount on your rail at your local hunting store. They arn't expensive.
Hope that helps
^Andrew^
12-07-2006, 06:26 PM
Like Dese said, if it's possible measure it. If it's for a 22. it should be a 3/8", from the picture it looks like a 3/8" but it's defiantly a dovetail and not a weaver and they don't use 7/8" a lot, so it should work. I'm 87.395% sure it'll work.:D
a_to_the_5
12-08-2006, 12:32 PM
how will i rig it up though because its to small to fit over the flatline
^Andrew^
12-08-2006, 04:17 PM
how will i rig it up though because its to small to fit over the flatline

I would try taking out the screws and spreading out the prongs first (you can use a screwdriver or something and twist it to spread them out) , but if that doesn't work, take the Flatline shroud apart and slip one half of the shroud first in between the scope ring's prongs and then the second one. It may take more then two hands.