can i do this?

[letterman96]

can you put a g36c hand gard on the custom 98 and at the same time have a
cyclone feeder to:confused:

[letterman96]

im pretty sure i can i just need to here it from someone else

[letterman96]

hello???

[NoelyDeezNutz]

How about give it a little more time than 40 mins....

Get me a link to the hand guard and ill tell you if it will work...

[pbmike1888]

dont keep asking if anyone is here. be patient and someone will answer.

i believe you might be able to. ive enver seen it on a 98C, but the cyclone on the 98C might not be in the same place as the a-5 cyclone.

it might fit it might not. there are plenty of alternatives for mil sim kits for the 98C.

my advise would be just forget the milsim kit. it only adds weight. it has no functionality.

[BlitzkriegBeast]

It can but you will have a hard time getting it off. Typically with the Cyclone you twist the hopper to take it off. There are however 45* bends to mount the hopper on an angle that will clear the G36C rail.
http://i98.photobucket.com/albums/l247/agennello/DSCF0283.jpg

[pbmike1888]

i forgot about those. lol. then yes. id go with what he said.

[letterman96]

ok thank you sorry not being patient

[letterman96]

It can but you will have a hard time getting it off. Typically with the Cyclone you twist the hopper to take it off. There are however 45* bends to mount the hopper on an angle that will clear the G36C rail.
http://i98.photobucket.com/albums/l247/agennello/DSCF0283.jpghey what barrel are you using?