Odyssey RPM questions.

[mikskater33]

Can anyone make a vertical adapter for cheap and sell it to me cuz i wanna get the rpm but i cant stand not having a reg/ front handle.???????

[DarkeWolf]

theres a thread called "everything that you need to know about the RPM" over in the odyssey thread on PBN about how to do this. None of the guys over there are offering to make them for people, but it will at least give you some idea of what needs to be done.

http://www.pbnation.com/showthread.php?t=1459932

[ihatefrance7]

im pretty sure but not sertain that if you get a autococker vertical adapter it will work

[DarkeWolf]

Sorry to have to disagree with you IhateFrance, but I dont see how an A/C va would work. At least, not without mods. The RPM has one hole, which is threaded for the air fitting.
An A/C va has a triple hole. The main hole for the screw, with an offset opening to either side of that, for air movement. So unless a set of holes were drilled into the body, and a screw found that would fit the threads in the hole for the air fitting, all it would do is blow air against the bottom of the body with an A/C vertical adapter.

It does raise some possibilities tho.
http://cgi.ebay.com/32-Degrees-Stainless-Steel-Spyder-Vertical-Adapter-NEW_W0QQitemZ130062171935QQihZ003QQcategoryZ47239Q QrdZ1QQcmdZViewItem

http://cgi.ebay.com/PIRANHA-VERTICAL-ADAPTOR-R6-ASA-CHROME-BLACK_W0QQitemZ190066002507QQihZ009QQcategoryZ4723 7QQrdZ1QQcmdZViewItem

I'm gonna ask Jeff in that thread if the fitting is threaded for standard 1/8" npt. If so...those will work!

[DarkeWolf]

hmmm. ok, I see what he did now. He just took a standard vertical adapter, like the ones that I linked to, and converted them from male, to female. so that instead of screwing into the body, they screw onto the stock air fitting.
that wouldnt be hard at all. just bore out the part that screws into the body on the v/a and then thread it for 1/8" npt. any machine shop could do it easy. Or anybody with a drill and a tap. definitely give the first few posts a read over ;)

Also, yeah, I see what you're saying now, about the cocker va. it might work. but you'd have to block off the two air outlets first.

[ehumes83]

Or what you could do is get a Piranha R6 Verticle adapter, ive got one on my R6 and it looks like it would be pretty standard to be able to use it on a RPM, you might want to use a CP mini reg cus it does stick down a little further than normal

[captainpyro1]

how to you change the bps on the rpm, mine has jumpers in the handle, not a selectable switch like the manual says, and the company wont respond...so im stuck with 15.4 bps....

and i heard about full auto...how might i do that?