Faulty promaster?

[eddie500]

Is my gun faulty?

If I air it up with no balls, and turn the trigger on. After maybe preesing the trigger after a couple of hundred times or so it will fire, with no balls in it. It is a bit startling when this happens, especially if I"m in my house.

Since this happens very rarely, but does happen and has happened more then a couple of times of doing ths, Would this be something I should send my gun back to warranty for?

Other then that, I have had no chops or any other problem yet.

[babustos]

Turn the eyes off. Shoot it with a paintball in it the way you do, if it shoots then its just the eyes.

[eddie500]

Turn the eyes off. Shoot it with a paintball in it the way you do, if it shoots then its just the eyes.


If the eyes are off, it should shoot the gun everytime I press the trigger. How will this tell me it is just the eyes?

[lotus_esprit5]

honestly i have no idea on this. is it possible that the eye holes aren't perfectly lined up?

only real advice i can offer is send it back to ICD to have it looked at. the only other thing i can think of is your battery is dying, but your gun is too new to have killed a 9 volt already, and you would probably start having solenoid problems first if your battery was low.

[bladinboy]

clean your eyes that might be it

[eatmybob67]

i had to read that 3 times just to try to understand what ur trying to say. try turning on the gun and pull the bolt back pull the trigger a few times slow, if u hear the noid clicking it probley means that the eyes arent put in correctly or the eyes are dirty. then let go of the bolt and pull the trigger again and this time the noid should click every time u pull the trigger in this case ur fine and there is nothing roung.

[hurleyhonda22]

turn on your gun and hold the trigger right away until LED starts blinking. This will turn the eyes off making you able to dryfire