i have been board [Archive] - Paintball Forums

Vague312

01-04-2007, 09:12 AM

Well guys i have been board for the last few weeks and i have been tinkering with my promaster. Im looking for more ideas on things i can do to it.

Currently i have

gun Matt Black Powdercoat with Gloss Black highlights.
18in Dye Boomstick
Palmer Fatty HPR
Palmer Micro Rock LPR (that was fun making)
Rewired Lesoya Board
Self Cleaning eyes
Relocated power LED
custom Valve
CCM feedneck
Quick Disconnects on the eye harness
Dye Stickies
CP Trigger

In the works

Custom Bolt
LPR Volumizer
RF Chip for the Pulse
Laser engraving on new Eye covers and rear cap
some milling
another lower pressure valve in the works

can anyone think of anything else?

like i said i have nothing better todo with my spare time. lol

thanks
---Joe

babustos

01-04-2007, 08:48 PM

Custom anno and milling.

eatmybob67

01-04-2007, 08:51 PM

id like to know how u made self cleaning eyes? or is this just a upgrade u can buy.

dnk818bd

01-04-2007, 10:34 PM

new detents

Vague312

01-05-2007, 08:21 AM

i grabbed the smaller form of WAS eyes and shaved down the plastic mount so when i do pop one in the breech the blowback pushes the paint past the eye instead of gobbing it on the eye.

detnets are fine imo. haven't had any real problems as of yet. if need be i can prob just make magnetic detents.

prob gonna drill another hole in the side of the reg mount today so i can see what my LPR is set at. Most of the stuff i just make myself when things are slow.

thanks guys

anything else anyone can think of?

Head Hunter 221

01-05-2007, 01:56 PM

Instead of anno and milling get it like in 3-D lazer engraving

dnk818bd

01-05-2007, 02:19 PM

spike bolt pin.

Vague312

01-06-2007, 04:17 AM

the laser engraving will be done shortly. Im getting the eye plates done and the rear nob. Thinking about getting the trigger done too. i just have to figure out how to use the dam machine lol.

sooner r later im going to be milling the rear fin so i can pull my bolt out like an intimidator. pulling the pin and grabbing the bolt is getting annoying.

here is a few pics of the marker currently

http://www.hunt101.com/img/462483.jpg

http://www.hunt101.com/img/462484.jpg

http://www.hunt101.com/img/462485.jpg

anything else

SKI008

01-06-2007, 07:13 AM

I'd get a smaller barrel tip as 18 in doesn't do anything but waste your air. Drop down to 12 in or 14 in.

Maybe swap the black parts out with someone else for different colored ones?