Why?!!?!?!!

[SilentTension]

i think i got the jankiest 4.0 lol.. i fixed all the leaks.. now we have just a slight problem.. it wont recock itself... ooo single shots.. anyone have any ideas on why it be doin this?

[SilentTension]

it wasn't lack of pressure.. my co2 tank according to the guage has the gun pressured up to 800 psi.. so it could be a broken o-ring.. im gonna strip the bolt now

[SilentTension]

i striped it down... o-rings are fine.. at least look alright.. i might just change them all and oil everything up nice hopefully that will fix it

[Creek]

Well I have seen this on other blow back markers. We changed the valve o-rings and it fix the problem.
50% of the time it seems to be that. If it been used a lot it comes down to the shear or hammer being worn down.

[brad85]

by other markers i assume you are refering to mine? is the problem with mine the sear?

[Creek]

yeah brad yours is the shear. Now what are we going to do about that buy a new shear or do you want me to make one out of stainless and see if it works

[DML Nug]

silent tension, I beleive it might be the kink in your hose is restricting air, you really need to fix that and install it without and twisting or forcing on the hose itself.

[thursday]

i though mine was broke today... i cleaned it last night and took off the lp chamer and today i was leaking from there. i took it off again and the valve pin wasnt sitting in the hole correctly... so i put it in right, and it still leaked... but not half as bad, so wiped off theo-ring, oiled it, put it on and its fine now. whew. i real didnt want to use my rebel this weekend.