Buying Promaster Upgrades - in order of importance

[MR. ZERO]

*PLEASE READ ENTIRE POST BEFORE COMMENTING*

ive got a promaster and i plan on gettin some upgrades, ive already got a CP HPR and a CCM no-pro feedneck. so im gonna list the upgrades im lookin at, IN ORDER OF IMPORTANCE, from a performance stand point. id really like u guys to look at the list and make, if any, suggestions as to switching this order around. ive already made up my mind as to which specific upgrades im getting, just tryin to figure out which order to buy them in. ok, here we go

1. AKA SCM-III LPR
2. Vapor Works Vapor Valve
3. ICD Underground Low Pressure Cylinder
4. Alamo City "Low Blow" Bolt
5. Kila Products Drive Board
6. Kila Products Magnetic Detents
7. CP Freestyle Trigger

i would really like reasons with any order changes u guys might make. any help is appreciated.

ICD 4 LIFE

[azndragon2222]

you might wanna think of adding a new barrel or barrel kit down the road sometime

[akathewolf]

I'd say go for a new barrel BEFORE you get hyped on the roller trig.
Chaos board would be a good upgrade as well.

[MR. ZERO]

ive thought about a new barrel, but to be honest as long as i use certain types of x-ball paint. i have no accuracy problems at all. but of course a new barrel is always a good investment

[lotus_esprit5]

I'd say a new barrel also. it seems like X-ball paint shoots great through anything, and the newer ICD stock barrels are a huge improvement over previous ones, but there's still a noticeable difference between my CP barrel and my stock FSP barrel. for the relatively low price of a quality barrel from J&J, Redz, CP, or another good barrel company, especially for a used one ($20-$25 shipped if you look around enough), I think its worth it.

Also I'd drop the bolt down a few spots, definately below the board. Other than that it looks solid. I might go for the NOX or Chaos over Kila, and a Palmer LPR over AKA, but the board and LPR you've chosen will still be great upgrades, I just have different preferences.

[Codename67]

*PLEASE READ ENTIRE POST BEFORE COMMENTING*

ive got a promaster and i plan on gettin some upgrades, ive already got a CP HPR and a CCM no-pro feedneck. so im gonna list the upgrades im lookin at, IN ORDER OF IMPORTANCE, from a performance stand point. id really like u guys to look at the list and make, if any, suggestions as to switching this order around. ive already made up my mind as to which specific upgrades im getting, just tryin to figure out which order to buy them in. ok, here we go

1. AKA SCM-III LPR
2. Vapor Works Vapor Valve
3. ICD Underground Low Pressure Cylinder [Dont REALLY need it, if you got the $, then sure thing]
4. Alamo City "Low Blow" Bolt [Stock one is GREAT]
5. Kila Products Drive Board
6. Kila Products Magnetic Detents
7. CP Freestyle Trigger

looks pretty good.

all i need is the ICDU LP ram and my baby will be 100% upped.

[Evilspyder]

Becarefull with the CCM feed neck. Make sure u can move the bolt freely after u have installed the CCM feedneck. When I got my CCM feedneck, it was scraping the top of my bolt. The feed neck was in the chamber by a hair, but enough to scratch the top of my bolt. CCM took my feedneck back and will shave 1 thread off.

Awsome feedneck tho. Still waiting for it to come back from CCM.