Problem :/

[shotbirdsfallin]

Well I was just out shooting my fusion and i had a barrel in the barrel so I turned my gun upside down (so the other ball wouldnt shoot) and shot and the bolt locked up and leaked air and my gauge shot up passed 600psi(wont go down, maybe its broke?) and now the gun doesnt shoot at all or make that clicky sound when pulling the trigger(even tried with eyes off). :/ any thoughts?

[Shadow21]

If your 'noid isn't cycling, you either 1. Blew it. 2. Disconnected the wiring.

[shotbirdsfallin]

>_<, how can i get ahold of a new noid?

[Shadow21]

Contacting DP. Ask for a second opinion. They might ask for you to ship it into them to make sure nothing else went wrong.

Have you tried replacing your battery?

[shotbirdsfallin]

Ahh got ti fixed, it started clicking again after i had to rip off the regulator, degassed down from 800ish psi.

Now it's leaking out the bottom of the reg :/

[piccointegra]

replace the o rings and lube it.. you can get o rings at any DIY store

[Uziel Gal]

If the gauge hasn't returned to zero after degassing the marker, you'll needto replace it.

For the reg to be leaking right out of the bottom, it means that the o-ring on the pressure adjuster is no longer sealing - it might need replacing, it might just need cleaning. Remove the circlip from the bottom of the reg and the adjuster should then screw all the way out of the reg so that you can access the o-ring.