Eyes?

[Magmoormaster]

is it possible to put eyes or break beam vision on a gun that doesnt have em?

[Accident]

yes. it just depends on what marker, and what type of eyes you want. you also need a board that is compatable with them.

[Crede777]

Yes you can drill eyes into a marker which does not come with eye holes pre-drilled. An example of this is a mech Autococker.

I would highly suggest having a proshop do it, however, because if you are doing break-beam eyes then the eye holes must be lined up with some degree of precision.

[Magmoormaster]

hm... i wonder if my gsx's board will work...

which one's better? anit-chop eyes? or break beam vision?

[babustos]

Antichop eyes
Breakbeam
Bouncebeam

Those are the two main eyes, breakbeam tends to be more reliable. You can put eyes on guns, but some guns you might not be able to. Its like putting a T-board with eyes on an Imagine, or putting an E2 on a mech Cocker. Basically eyes are drilled in the breech, then they're connected to an electronic board and protected by eye covers. What gun do you have?

[pbmike1888]

go breakbeam. with bounce beam, dark paint can soemtimes absorb too much of the beam and it will think there is no ball there and wont shoot.

[413sonix]

Kinda helps to know what gun you use. Like on older right feed Autocockers you couldn't use a breakbeam setup. Tippmann's also can't accept eyes since nobody makes a board for Tippmanns that use eyes.

[Magmoormaster]

i have a piranha GSX. has an eforce trigger frame.

[di$TOrTed]

Some piranha's are already drilled for eyes and there is an upgrade kit. I'm not sure if yours has that or not.

[MarKasa]

lol my friend wanted eyes for a mechanical spyder.

[413sonix]

How did that contribute to the thread? So the 2 posts I've seen you make are spam posts. You're not gonna be around here for long...