e-grip help?

[Evil_Wayz]

Someone posted something about the trigger on their e-grip magnetizing to the little tab, causing it not to fire. I can't find the post, what should I do, jsut change the battery?

[m98sniper15]

Could you explain a little better. I remember that thread to I just can't find it. I'll try to help you if you explain a little better.

[Evil_Wayz]

Could you explain a little better. I remember that thread to I just can't find it. I'll try to help you if you explain a little better.

There is the trigger, and hten there is the allen screw that determines how far back the trigger has to go, then there is a little metal tab that contacts the screw, when the screw pushes the tab down far enough it clicks the solenoid ( I think it's a solenoid) and engages the sear. Well if the screw never breaks contact it doesnt reset.

I tapped it with ascrewdriver and its demagnetized now. But I want to kow if ther eis anything I can do to prevent this. The other guy said something about putting tape or paper over it.

TIA.

[Evil_Wayz]

New info. It appears that the magnetizing effect is caused by the battery going dead. In the future, I would suggest changing batteries first, before doing what I did, which was manually adjust the sear height. Bah.