PDA

View Full Version : Rebel Xtreme

KrZ ChrOnO bOi
02-28-2002, 08:09 PM
i just ordered mah Rebel Xtreme and i wanna know what can i do so it would be in good condition and it wont ezly break down or chop any paintballs. also i wanna know if a JT Excelerator 4.0 barrel can fit the Xtreme. :|
KrZ ChrOnO bOi
02-28-2002, 08:10 PM
its not the rebel xtreme 2002.
Lorquas
03-01-2002, 04:08 PM
if the jt exclerator barrel has spyder threads, it should fit. and as for mantinence just do the normal, kepp it clean, lubed etc..
takeastand
03-02-2002, 09:22 PM
A good way to oil ur gun is to put gun oil in the ASA adapter (where the Co2 screws into the gun) then screw on ur tank and shoot about 15 rounds. This will lube the whole gun pretty much, just don't shoot towards anything cause oil tends to spary out of the barrel. The best way is to take apart the gun and oil around all the o-rings and clean any paint or broken shells from the gun after each use. Hope I helped.
HoRnY_ToAd6975
03-02-2002, 09:52 PM
Yes, the JT Excellerator barrel will fit the Rebel Xtreme (and vice versa). Both are spyder threaded and both will fit on each gun.
KrZ ChrOnO bOi
03-03-2002, 08:41 AM
thx for the help guys :)
Lorquas
03-03-2002, 11:24 AM
when you lube the gun by putting it in the ASA, TAKE OFF YOUR BARRELL, i learned this the hard way. The oil was hard to get out of the barrel (with my squegee). And even though it was cool for the ball to spin enough that I could shoot behind oak trees....its bad for everything else :cool: